HomeMy WebLinkAboutLA165736 SAC Letter
MCES USE: Letter Reference: 180925C7 Address ID: 6606 Payment ID: 415551
___________________________________________________________________________________________________________________
Date of Determination: 09/25/18 Determination Expiration: 09/25/20
Greetings!
Please see the determination below.
Project Name: Dakota County Heritage Library & License Center
Project Address: 20085 Heritage Drive
Suite #/Campus: N/A
City Name: Lakeville
Applicant: Jennifer McMaster, HGA
Special Notes: None
Charge Calculation:
Public Library: 23,696 sq. ft. @ 3950 sq. ft. / SAC = 6.00
Total Charge: 6.00
Credit Calculation:
Lakeville Heritage Library (SAC 02/99) = 6
Total Credit: 6.00
Net SAC: 0 – or – 0 SAC Due
The business information was provided to MCES by the applicant at this time. It is the City’s responsibility to substantiate the
business use and size at the time of the final inspection. If there is a change in use or size, a redetermination will need to be
made. If you have any questions email me at: cory.mccullough@metc.state.mn.us.
Thank you,
Cory McCullough
SAC Technician
Please visit our SAC website by going to: http://www.metrocouncil.org/SACprogram
A. PROVIDE SAFE MEANS OF EGRESS THROUGH AND AROUND THE BUILDING AND SITE AT ALL TIMES.
B. PROVIDE FIRE EXTINGUISHERS PER AUTHORITY HAVING JURISDICTION’S REQUIREMENTS AT ALL TIMES
THROUGHOUT CONSTRUCTION AREA.
C. ALL SHUTDOWNS OF MECHANICAL, SPRINKLER, FIRE ALARM AND ELECTRICAL SYSTEMS SHALL BE COORDINATED
WITH OWNER. COMPLY WITH AUTHORITY HAVING JURISDICTION’S REQUIREMENTS FOR NOTIFICATION, FIRE
WATCH, RE-TESTING, ETC.
D. AVOID DISRUPTION TO ADJACENT AREAS AS MUCH AS POSSIBLE. KEEP NOISE TO A LEVEL ACCEPTABLE TO THE
OWNER BY SCHEDULING EXCESSIVE NOISE TASKS WITH OWNER. ALL SAW-CUTTING AND NOISE VIBRATION
PRODUCING CONSTRUCTION TO BE SCHEDULED WITH OWNER SO AS TO NOT INTERFERE WITH ADJACENT
OCCUPIED SPACES.
E. PROVIDE CONSTRUCTION BARRIERS AND DUST CONTROL BETWEEN CONSTRUCTION AREAS AND OCCUPIED AREAS
AT ALL TIMES.
F. VERIFY EXISTING CONDITIONS AND DIMENSIONS. COORDINATE THE EXTENT OF DEMOLITION WORK AND EXISTING
CONSTRUCTION TO REMAIN WITH NEW WORK. NOTIFY ARCHITECT OF CONFLICTS.
G. BLACK DASHED LINES INDICATE EXISTING CONSTRUCTION TO BE REMOVED, UNLESS NOTED OTHERWISE.
H. REFER TO STRUCTURAL, MECHANICAL, PLUMBING AND ELECTRICAL DRAWINGS FOR DISCIPLINE SPECIFIC
DEMOLITION ITEMS NOT SHOWN OR NOTED.
I. WHERE EXISTING CONSTRUCTION IS REMOVED, CUT, DRILLED, DAMAGED OR OTHERWISE DISTURBED, PATCH
DEFECTIVE AND INCOMPLETE SURFACES AS REQUIRED TO MATCH ADJACENT, EXISTING UNDAMAGED SURFACES,
UNLESS NOTED OTHERWISE.
J. REMOVE DESIGNATED WALLS AND PARTITIONS IN THEIR ENTIRETY INCLUDING DUCTS, PIPING, CONDUITS, BRACING
AND OTHER ELEMENTS IN OR ON THESE ASSEMBLIES WHICH MAY OR MAY NOT BE SPECIFICALLY IDENTIFIED,
UNLESS NOTED OTHERWISE.
K. PATCH OPENINGS IN WALLS, PARTITIONS, FLOORS AND CEILINGS THAT ARE TO REMAIN TO MATCH EXISTING,
ADJACENT FINISHED SURFACE. MAINTAIN PENETRATION LISTINGS AND ALL FIRE RATING REQUIREMENTS.
L. THOROUGHLY CLEAN AND PREPARE ALL SURFACES TO RECEIVE NEW FINISH OR COVERING. COMPLETELY REMOVE
DIRT, DUST, GREASE, OIL, PAINT, LOOSE MATERIALS, SOIL, ETC AS NECESSARY. PLACE SURFACES IN MOST
SUITABLE CONDITION FOR NEW FINISH.
M. THE FOLLOWING ITEMS TO BE SALVAGED AND TURNED OVER TO THE OWNER: LIBRARY SECURITY GATES
N. WHERE EXISTING PIPING IS PARTIALLY REMOVED, CAP AND TAG END OF REMAINING PORTION.
O. WHERE CEILINGS ARE INDICATED TO BE DEMOLISHED, REMOVE UNUSED SUSPENSION WIRES, WALL ANGLES,
BRACES, STRUTS, FRAMING, ETC.
P. PROVIDE DEMOLITION OF SLAB ON GRADE AS REQUIRED BY NEW WORK AND DEMOLITION WORK OF MECHANICAL
AND ELECTRICAL TRADES. REFER TO MECHANICAL AND ELECTRICAL DRAWINGS AND COORDINATE EXTENT OF
DEMOLITION. PATCH SLAB PER STRUCTURAL DETAIL 9/S500. PROVIDE NEW VAPOR BARRIER AND LAP ONTO
EXISTING PER MANUFACTURER'S RECOMMENDATIONS. PROVIDE CONTROL JOINTS IN INFILLED PORTIONS OF SLAB
AT EVERY 15' O.C.
GENERAL NOTES - DEMOLITION PLAN
A
B
C
D
E
F
G
H
J
K
L
M
XC
XB
XA
10 11 12123456789122
12
1
1
1
2211
1111
1
1
11
11
1111
2
2
4
44
4
4
4
4
4444
55
520
5
6
6
6
15
1437
23
4
4
26
46
13
6
8
9
1011101010
14
141 1
1611
16
21
21
21
21
21
21
21
21
21
21
2121
21
21 21
21 21
21
20
21
20
21
20
21
20
21
21 16
21
21
21
21
21
21
21
21
21
2121212121
42411
6
25 .27
AA.8
10.89.4
7
28296'-2"10'-4"11'-0"14'-0"14'-0"14'-0"11'-0"10'-4"22'-0"17'-10" 22'-0" 22'-0" 22'-0" 22'-0" 22'-2" 21'-4" 21'-4" 10'-10" 11'-2" 10'-6" 11'-6"7'-0"14'-8"14'-8"7'-0"14'-10"24'-0"28'-0"11'-0"
225'-8"112'-10"10
30
617181831
31
16
32
32
33
3232
32
31
31
4 2 0 N o r t h 5 t h S t r e e t , S u i t e 1 0 0
T e l e p h o n e 6 1 2 . 7 5 8 . 4 0 0 0
M i n n e a p o l i s , M i n n e s o t a 5 5 4 0 1
HGA NO:
DATE:
DAKOTA COUNTY
20085 HERITAGE DR
LAKEVILLE, MN 55044
NAME:
DATE:
REGISTRATION NUMBER:
I HEREBY CERTIFY THAT THIS PLAN,
SPECIFICATION OR REPORT WAS PREPARED BY
ME OR UNDER MY DIRECT SUPERVISION AND
THAT I AM A DULY LICENSED ARCHITECT
UNDER THE LAWS OF THE STATE OF
COPYRIGHT HAMMEL, GREEN AND ABRAHAMSON, INC.C CONSTRUCTION DOCUMENTSCONSTRUCTION DOCUMENTS
September 10, 2018
1668-005-00
HERITAGE LIBRARY
AND LICENSE CENTER
RENOVATION
September 10, 2018
MINNESOTA
9/7/2018 4:38:50 PMC:\Users\acjustinw\Documents\Revit Local Files\A18-Dakota County Heritage Library-1668-005-00_jwanghga.rvtA100
DEMOLITION
PLAN
Jennifer McMaster
41551
KEYNOTES - DEMOLITION PLAN
#DESCRIPTION
1 REMOVE AND DISPOSE OF EXISTING PARTITION TO EXTENT INDICATED. REMOVE ALL DOORS, DOOR FRAMES, AND WINDOWS WITHIN REFERENCED
PARTITION.
2 REMOVE AND DISPOSE OF EXISTING DOOR AND DOOR FRAME AS INDICATED
3 DEMO EXISTING WALL AS REQUIRED FOR INSTALLATION OF NEW DOOR. COORDINATE WITH NEW WORK.
4 REMOVE AND DISPOSE OF EXISTING MILLWORK. WHERE ON OR ADJACENT TO EXISTING WALL TO REMAIN, PATCH FINISH AS REQUIRED TO MATCH
ADJACENT CONSTRUCTION.
5 REMOVE EXISTING PLUMBING FIXTURES. COORDINATE EXTENT OF DISPOSAL WITH OWNER.
6 REMOVE AND DISPOSE OF EXISTING EQUIPMENT AND/OR FURNITURE. PATCH AND/OR INFILL FINISH AS REQUIRED TO MATCH ADJACENT CONSTRUCTION.
7 SALVAGE EXISTING FIRE EXTINGUISHER CABINET FOR RE-USE IN NEW CONSTRUCTION.
8 REMOVE EXISTING BOOK DROP. INCREASE HEIGHT AND WIDTH OF OPENING AS REQUIRED FOR INSTALLATION OF NEW WINDOW. SEE 12/S600 FOR
ADDITIONAL INFORMATION. REMOVE AND RE-INSTALL FACE BRICK AS REQUIRED BY INSTALLATION OF NEW CMU LINTEL. PROVIDE NEW STAINLESS
STEEL LOOSE LINTEL; SEE A460 FOR LINTEL INFORMATION.
9 DEMO EXISTING WALL AS REQUIRED FOR NEW OPENING IN WALL. COORDINATE WITH NEW WORK.
10 REMOVE EXISTING EXTERIOR WALL AND WINDOW SYSTEM, TO EXTENT INDICATED OR AS REQUIRED FOR NEW WORK, FROM TOP OF DECK ABOVE DOWN
TO TOP OF EXISTING FOUNDATION WALL. SALVAGE BRICK AND CAST STONE FOR RE-USE IN PATCHING WORK TO EXTENT POSSIBLE. PIPE COLUMNS TO
REMAIN. COORDINATE EXTENT OF DEMOLITION WITH NEW WORK. SEE EXTERIOR ELEVATION, PLAN DETAIL, AND STRUCTURAL DRAWINGS FOR
ADDITIONAL INFORMATION. CONNECT NEW SLAB ON GRADE TO EXISTING PER 9/S500.
11 REMOVE EXISTING EXTERIOR WALL AND WINDOW SYSTEM TO EXTENT INDICATED FROM TOP OF WALL DOWN TO TOP OF EXISTING FOUNDATION WALL.
REMOVE EXISTING COLUMN. ROOF STRUCTURE MUST BE SHORED PRIOR TO REMOVING STEEL COLUMN. COORDINATE EXTENT OF DEMOLITION WITH
NEW WORK. REFER TO STRUCTURAL FOR ADDITIONAL INFORMATION.
12 REMOVE AND DISPOSE OF EXISTING STOREFRONT. COORDINATE EXTENT OF DEMOLITION WITH NEW WORK.
13 SALVAGE EXISTING LIBRARY SECURITY GATES AND TURN OVER TO OWNER.
14 REMOVE AND DISPOSE OF EXISTING STOOP SLAB AND FOUNDATION WALLS.
15 REMOVE AND DISPOSE OF EXISTING AUTOMATIC SLIDING DOOR ASSEMBLY. COORDINATE EXTENT OF DEMOLITION WITH NEW WORK.
16 EXISTING TERRAZZO FLOORING TO REMAIN. PROVIDE PROTECTION OF FLOOR DURING CONSTRUCTION.
17 REMOVE AND DISPOSE OF EXISTING GYP BD AND MET STUD FURRING IN PREPARATION FOR NEW FURRING. COORDINATE EXTENT OF DEMOLITION WITH
NEW WORK.
18 REMOVE PORTION OF EXISTING PARTITION AS REQUIRED FOR INSTALLATION OF NEW HSS POST AND WIDE FLANGE BEAM. COORDINATE LOCATION AND
EXTENT WITH NEW WORK. REPAIR WALL AFTER INSTALLATION OF NEW COLUMN AND BEAM.
20 REMOVE ALL EXISTING TILE AND TILE BACKER BOARD WITHIN RESTROOMS. REMOVE ALL EXISTING PLUMBING FIXTURES, TOILET PARTITIONS, AND
TOILET ROOM EQUIPMENT. VERIFY WITH OWNER EXTENT OF DISPOSAL.
21 REMOVE AND DISPOSE OF EXISTING FLOOR COVERING. VERIFY EXTENT WITH INTERIOR DRAWINGS.
22 REMOVE AND DISPOSE OF EXISTING DOOR AND FRAME. WIDEN MASONRY OPENING AS REQUIRED FOR NEW DOOR AND FRAME. SEE 12/S600 FOR
ADDITIONAL INFORMATION. REMOVE AND RE-INSTALL FACE BRICK AND GYPSUM AND METAL STUD OR FURRING FINISH AS REQUIRED BY INSTALLATION
OF NEW CMU LINTEL. PROVIDE NEW LOOSE LINTEL IN BRICK AND FINISH TO MATCH EXISTING LINTEL FINISH; SEE A460 FOR LINTEL INFORMATION.
23 DEMO MASONRY WALL AS REQUIRED FOR INSTALLATION OF NEW DOOR. SEE 12/S600 FOR ADDITIONAL INFORMATION. REMOVE AND RE-INSTALL FACE
BRICK AND GYPSUM AND METAL STUD OR FURRING FINISH AS REQUIRED BY INSTALLATION OF NEW CMU LINTEL. PROVIDE NEW LOOSE LINTEL IN BRICK
AND FINISH TO MATCH EXISTING LINTEL FINISH; SEE A460 FOR LINTEL INFORMATION..
24 DEMO MASONRY WALL AS REQUIRED FOR INSTALLATION OF NEW BOOK DROP. COORDINATE OPENING REQUIREMENTS WITH AMH AND BOOK DROP BY
FF&E. SEE 12/S600 FOR ADDITIONAL INFORMATION. REMOVE AND RE-INSTALL FACE BRICK AND GYPSUM AND METAL STUD OR FURRING FINISH AS
REQUIRED BY INSTALLATION OF NEW CMU LINTEL. PROVIDE NEW STAINLESS STEEL LOOSE LINTEL; SEE A460 FOR LINTEL INFORMATION.
25 REMOVE ONE COURSE OF 6" CMU AT TOP OF WALL AS REQUIRED FOR INSTALLATION OF NEW ROOF AND ROOF STRUCTURE. REMOVE FLASHING, BRICK,
MASONRY ACCESSORIES, INSULATION, AND ROOFING AS REQUIRED. REFER TO STRUCTURAL DETAIL AND REFER TO SECTION DETAIL FOR ADDITIONAL
INFORMATION.
26 EXISTING BULLETIN BOARD TO BE SALVAGED AND RE-INSTALLED AT SAME LOCATION DURING NEW CONSTRUCTION. REMOVE AND DISPOSE OF EXISTING
MILLWORK.
27 REMOVE AND DISPOSE OF EXISTING FLOOR MAT. GROUT FLOOR AS REQUIRED FOR FLUSH INSTALLATION OF NEW FLOORING MATERIAL.
28 REMOVE AND DISPOSE OF EXISTING WALL COVERING. PATCH FINISH OF WALL AS REQUIRED TO MATCH ADJACENT SURFACE.
29 INFILL BOOK DROP OPENING IN EXISTING WALL. FINISH TO MATCH ADJACENT WALL.
30 REMOVE AND SALVAGE EXISTING BOOK DROP SIGN. RE-INSTALL OVER NEW EXTERIOR BOOK DROP.
31 HATCHED AREA INDICATES AREA OF EXISTING SLAB ON GRADE TO BE REMOVED FOR INSTALLATION OF NEW ELECTRICAL WORK. COORDINATE EXACT
LOCATIONS WITH NEW WORK. PATCH SLAB PER STRUCTURAL DETAIL 9/S500. PROVIDE NEW VAPOR BARRIER AND LAP ONTO EXISTING PER
MANUFACTURER'S RECOMMENDATIONS. PROVIDE CONTROL JOINTS IN INFILLED PORTIONS OF SLAB AT EVERY 15' O.C.
32 REMOVE AND DISPOSE OF PORTION OF TERRAZZO FLOORING AS REQUIRED FOR INSTALLATION OF NEW CARPET FLOORING; SEE FINISH PLANS.
COORDINATE EXTENT OF DEMOLITION WITH NEW WORK. WHERE OCCURS, PROVIDE SMOOTH AND FLUSH TRANSITION BETWEEN EXISTING TERRAZZO
AND NEW FLOORING MATERIAL. INFILL WITH CEMENTITIOUS UNDERLAYMENT AS REQUIRED FOR FLUSH INSTALLATION OF NEW FLOORING MATERIAL.
33 REMOVE AND DISPOSE OF TERRAZZO FLOORING. COORDINATE EXTENT OF DEMOLITION WITH NEW WORK. INFILL WITH CEMENTITIOUS UNDERLAYMENT
AS REQUIRED FOR FLUSH INSTALLATION OF NEW FLOORING MATERIAL.
1/8" = 1'-0"1 DEMOLITION PLAN - LEVEL 01
ALIGNALIGNALIGNALIGN ALIGNALIGNALIGN ALIGNALIGNALIGN ALIGN
ALIGN
ALIGN
ALIGNALIGNALIGN ALIGN
ALIGN
ALIGNALIGNALIGN
ALIGN
ALIGNALIGN ALIGN
A400
1
A400
2
A400
3
A
B
C
D
E
F
G
H
J
K
L
M
XC
XB
XA
10 11 12123456789
VESTIBULE
100LOBBY
101
DATA
120
ELEC/STOR
121
MECHANICAL
ROOM
129
LICENSE
CENTER
130
BREAK
ROOM
131
STORAGE
132
MANAGER
133
MECHANICAL/
ELECTRICAL
ROOM
141
STAFF
TOILET
134
STORAGE
ALCOVE
140
LOCKERS
139
COMMUNITY
ROOM
111
CHILDREN'S
AREA
150
CHILDREN'S
STORAGE
114
JANITOR
116
TOILET
115 STORAGE
112
ALCOVE
136
MEN
117
WOMEN
118
AAAA6'-2"10'-4"11'-0"14'-0"14'-0"14'-0"11'-0"10'-4"22'-0"17'-10"11.4
17'-10" 22'-0" 22'-0" 22'-0" 22'-0" 22'-2" 21'-4" 21'-4" 10'-10" 11'-2" 10'-6" 11'-6" 4'-10" 6'-2"7'-0"14'-8"14'-8"7'-0"17'-10"10"10"
137'-4"25'-0"10"40'-0"6'-0"10"14'-10"24'-0"28'-0"READING
ROOM
102.1
LIVING
ROOM
105
TEEN
106
STUDY
107
STUDY
108
STUDY
109
STUDY
110
MAKER
104.2
STUDY
151
CALMING
ROOM
152
STUDY
153
QUIET
154
STORAGE
104.3
STORAGE
135
STAFF
TOILET
127
VESTIBULE
128
BREAK
ROOM
125
WORK
ROOM
122
OFFICE
123
OFFICE
124 WORK
ROOM
119
COLLECTION
103.1
READING
ROOM
102.2
READING
ROOM
104.1
COLLECTION
103.2
OPEN
OFFICE
138
WORK
ROOM
137
2
A410
4
A410
4
A410
16
A661 A6012A6011A601
14A60113
1
A410
1
A600
3
A600
2
A600
3
A410
3
A410
15
A661
1
A602107108104.3
154153151
152
111B
115
114
141 133132131134130
111A
101C
101B
101A119124123
121127 122135A126125 A6016 A60312A603
16A60310A60111
1 11102104.2112MOTHER'S
ROOM
126
8
A602
6
5 A6014 A60117 A60317
8A60213A60215A60214A6032A603
15 A60314 A6037
11
4
A600A601831179118A400
45
A420A602
2
2'-8"2'-6"A6033
4
A4203 LKR-2
7
A461
5
A461
9
A461
1
A461
2
A461
B2a
LKR-1
MFP-1
1 A60349
15
A400
5
STUDY
110.1
STUDY
110.2
109110110.1110.2A60011
19
R&S-1
FM1
FM2
FM2
FM1
FM27
A420
15
A661 SIM
15
A661 SIM
15
A661 SIM
15
A661 SIM
15
A661 SIM
11
A461128ASERVICE
DESK
101.2 129B116139
150
PNLG-1
PNLG-1
7-LOOP POWDER-
COATED BIKE RACK
AA.8AA.8
BA-2A8a
10.89.4
3'-0" 17'-4 1/2" VIF 11'-0" VIF 11'-5" VIF
3'-4" 5'-4"8"2'-0" 2'-8" 5'-4"8"2'-0" 2'-8" 3'-4" 12'-0"
3'-4"
2'-0" 8"
5'-4" 2'-8"
2'-0" 8"
5'-4" 2'-8"
2'-0" 8"
5'-4" 2'-8"
2'-0" 8"
5'-4" 2'-8"
2'-0" 8"
5'-4" 2'-8"
2'-0" 8"
5'-4" 2'-8"
2'-0"
8"
5'-4" 2'-8"
2'-0" 8"
5'-4" 2'-8"
2'-0" 8"
9'-4"
2'-0" 8"
5'-4" 17'-4"
2'-0" 8"
5'-4" 3'-4"3'-4"2'-0" 8"5'-4" 3'-4" 3'-4" 7'-0"2121 110'-2"TYP.7'-7"7 7 7 7B3aB3a
13'-9 1/2"76"
1'-5"
35'-8 1/2" RO, VIF 8"
B3a
B3a
9'-1" CLR
CLR
6'-6 1/2"2"B2aB2a
10'-8" 10'-5"6'-5"2'-3"A6aA3a7'-3"
1'-6"
4'-6"
1'-9"B3aB3a8"2'-0"12'-4"4'-6"6"6"1'-10"1'-7"5"B3aB3a3'-0"3'-10"4'-0"9'-6"5'-0" 5 1/2" 30'-2"
32'-3" 1'-6 1/2" 7'-9 1/2"11'-6"11'-6"9'-0" 3'-2"8'-0"38'-0"3'-0" 2'-8" 16'-8"1'-10"6'-2"
9'-10"
.3'-9"6'-7"B3a ABOVE
BRICK
16'-6"
10
7'-2" VIF
A400
6
6'-8"3'-4"8'-0"8
11
B3a6
A420
9
A461 SIM, RVS
B3i
15'-4"
B2a
4'-2"4B3a
B3a
9
A420
5
A461 SIM, RVS
9
A420 SIM, RVS
@ 7'-2"AFF
.PIC RAIL-1
10
5 B3i
B.O. CLERESTORY 129'-8"4'-2"10 10 10
12
A681A60116
1'-8"A3i 15'-4"1313 13
13
131313
13
11
A681
B2a B1a
4"
B2a 8"4"B2a B2a
B1aA60112
18
A660
1
A662
1
A662 RVS 6" 1'-6"2'-0"6"13
A661
13
A661 SIM
2
A6622'-1"2
A662 SIM, RVS
3
A662
3
A662 RVS
13
A661 ABV
13
A661 ABV
13
A661 ABV
13
A661 ABV A6009A602
17
TYP
18
A681A60118
13
A661 ABV 13
A661 ABV
13
A681 1414
A661
15
A080
15
A080
16161515FLM-1
FLM-1
FLM-1
FLM-1
TYP
B3a
A3a11A3a
A3d5
17
A. ALL INTERIOR PARTITIONS SHALL BE "A3a" UNLESS NOTED OTHERWISE.
B. PLAN DIMENSIONS ARE FROM FACE OF FINISH WHERE “HOLD” OR “CLEAR” ARE
INDICATED. ALL OTHER PLAN DIMENSIONS ARE FROM FACE OF PARTITION TYPE
AND DO NOT INCLUDE APPLIED FINISHES.
C. ENSURE FINISH SURFACES ARE FLUSH AND SEAMLESS WHERE PARTITIONS
AND/OR FURRING ARE COPLANAR.
D. ALL PIPING, CONDUITS AND RELATED MECHANICAL AND ELECTRICAL ITEMS SHALL
BE CONCEALED WITHIN PARTITION/WALL ASSEMBLY IN FINISHED AREAS UNLESS
NOTED OTHERWISE.
E. PROVIDE BACKING/BLOCKING TO SUPPORT ALL WALL-MOUNTED ITEMS.
F. ALL MECHANICAL EQUIPMENT PADS TO BE 4" HIGH MINIMUM, UNLESS NOTED
OTHERWISE. SIZE OF PADS TO BE VERIFIED BY CONTRACTOR
G. REFER TO SHEET A080 FOR DETAIL OF TYPICAL DOOR JAMB AT ABUTTING WALLS
OR PARTITIONS.
H. ALL OFFICES AND SINGLE-USE TOILET ROOMS TO HAVE A COAT HOOK <CH-2>
MOUNTED ON THE DOOR (ROOM SIDE) UNLESS NOTED OTHERWISE.
I. PATCH ALL HOLES IN EXISTING SURFACES WHERE EQUIPMENT HAS BEEN
REMOVED OR DEMOLITION HAS OCCURRED. PREPARE SURFACES AS REQUIRED
FOR NEW FINISHES. PATCH TO MATCH ADJACENT SURFACE IF NOT SCHEDULED.
J. ALL EXISTING FLOOR OPENINGS AND DEPRESSIONS IN THE WORK SHALL BE
FILLED OR CLOSED, UNLESS NOTED OTHERWISE, WITH MATERIALS TO MATCH
ADJACENT SURFACES, FINISHES AND FIRE RATINGS.
GENERAL NOTES - FLOOR PLAN
4 2 0 N o r t h 5 t h S t r e e t , S u i t e 1 0 0
T e l e p h o n e 6 1 2 . 7 5 8 . 4 0 0 0
M i n n e a p o l i s , M i n n e s o t a 5 5 4 0 1
HGA NO:
DATE:
DAKOTA COUNTY
20085 HERITAGE DR
LAKEVILLE, MN 55044
NAME:
DATE:
REGISTRATION NUMBER:
I HEREBY CERTIFY THAT THIS PLAN,
SPECIFICATION OR REPORT WAS PREPARED BY
ME OR UNDER MY DIRECT SUPERVISION AND
THAT I AM A DULY LICENSED ARCHITECT
UNDER THE LAWS OF THE STATE OF
COPYRIGHT HAMMEL, GREEN AND ABRAHAMSON, INC.C CONSTRUCTION DOCUMENTSCONSTRUCTION DOCUMENTS
September 10, 2018
1668-005-00
HERITAGE LIBRARY
AND LICENSE CENTER
RENOVATION
September 10, 2018
MINNESOTA
9/6/2018 7:22:36 PMC:\Users\acjustinw\Documents\Revit Local Files\A18-Dakota County Heritage Library-1668-005-00_jwanghga.rvtA200
FLOOR PLAN
Jennifer McMaster
41551
1/8" = 1'-0"1 FLOOR PLAN - LEVEL 01
KEYNOTES - FLOOR PLAN
#DESCRIPTION
1 DASHED LINE INDICATES EDGE OF OPENING ABOVE
2 ALIGN FACE OF WALL TO EXISTING SOFFIT ABOVE.
3 MONITOR BY OWNER. SEE ELECTRICAL. PROVIDE BACKING IN EXISTING WALL AS
REQUIRED.
4 <AP-1> 24"X24". COORDINATE LOCATION WITH MECHANICAL EQUIPMENT.
5 INSTALL SALVAGED FIRE EXTINGUISHER CABINET AT LOCATION INDICATED.
6 MECHANICAL UNIT - REFER TO MECHANICAL PLANS FOR SIZE AND LOCATIONS
7 CENTER PARTITION LOCATION ON MULLION
8 PAINT EXISTING CABINET UNIT HEATER. PROVIDE NEW SEALANT AT PERIMETER OF UNIT
AND REPLACE METAL TRIM.
9 MONITOR BY OWNER. SEE ELECTRICAL. PROVIDE BACKING IN WALL AS REQUIRED.
10 CENTER PARTITION LOCATION ON MULLION ABOVE
11 NEW OPENING BY GC IN EXISTING EXTERIOR WALL. COORDINATE WITH AMH AND BOOK
DROP FACE PLATE BY FF&E. COORDINATE WITH AMH SYSTEM. PROVIDE WATER-TIGHT,
INSULATED ASSEMBLY WITH BLOCKING AS REQUIRED BY AMH/BOOK DROP SYSTEM. GC TO
COORDINATE AMH AND FIRE SUPPRESSION SYSTEM. FINISH INTERIOR WALL, INCLUDING
HEAD, JAMB, AND SILL, AS REQUIRED BY AMH/BOOK DROP.
12 PROVIDE <VR-1> IN NEW FURRING FROM BOTTOM TO TOP. TIE IN TO EXISTING VR AND
SEAL ALL SEAMS.
13 HSS POST. SEE 1/A661.
14 <LKB-1>. MOUNT TOP AT 48" AFF.
15 INFILL EXISTING WALL OPENING TO MATCH EXISTING CONSTRUCTION. PROVIDE <INSUL-40>
IN NEW WALL.
16 AUTO OPERATOR PUSH BUTTON, NARROW MULLION-MOUNT STYLE. INSTALL IN EXISTING
MULLION. PROVIDE ELECTRICAL CONNECTION AND MODIFY MULLION AS REQUIRED.
17 MOTORIZED PROJECTION SCREEN BY OWNER. SEE ELECTRICAL. PROVIDE BLOCKING
AND/OR SUPPORT AS REQUIRED FOR MOUNTING.