Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
LA188778 16452 Duluth Tr Permit Pack
RESIDENTIAL BUILDING PERMIT APPLICATION CITY OF LAKEVILLE BUILDING INSPECTIONS DEPARTMENT 20195 HOLYOKE AVENUE LAKEVILLE, MN 55044 952-985-4440 Office Use Only __________________ Permit Number ___________________ Received By ___________________ Date Received ___________________ Fee Total SITE ADDRESS: MAILING ADDRESS: CITY: STATE: ZIP: JOB DESCRIPTION:__________________________________ MASTER PLAN: (Number or Address)____________________ LIST OTHER STRUCTURES ON PROPERTY:_______________________________________________________________ ESTIMATED VALUATION: PROPOSED START DATE: END DATE: (New Residential Only): LEGAL DESCRIPTION: LOT: _____ BLOCK: _____ SUBDIVISION: APPLICANT IS: RESIDENT OWNER CONTRACTOR EMAIL NEW MODEL HOME: YES NO (IF YES – ADMINISTRATIVE PERMIT REQUIRED) PLEASE FILL OUT THE FOLLOWING COMPLETELY (All Contractor information must be as listed on State License) RESIDENT OWNER NAME:_______________________________________________________________________________ HOME PHONE #:_____________________________ CELL PHONE:___________________________ GENERAL CONTRACTOR Homeowner Contractor CONTRACTOR:_______________________________________________________________________ LICENSE #:BC______________ LEAD CERTIFICATE#_______________ (PRE 1978 STRUCTURE) OFFICE PHONE #:_____________________________ CELL PHONE:___________________________ ADDRESS:____________________________ CITY:________________ ST:______ ZIP:____________ PLUMBING WORK Homeowner Contractor CONTRACTOR:__________________________________________LICENSE #: PM______________ OFFICE PHONE #:_____________________________ CELL PHONE:___________________________ ADDRESS:____________________________ CITY:________________ ST:______ ZIP:____________ MECHANICAL WORK Homeowner Contractor CONTRACTOR:________________________________________ _______________________________ OFFICE PHONE #:_____________________________ CELL PHONE:___________________________ ADDRESS:____________________________ CITY:________________ ST:______ ZIP:____________ BOND #:_______________________________________ EXPIRATION DATE____________________ SEWER/WATER CONTRACTOR New Construction Only NAME:________________________________________________ ______________________________ HOME PHONE _____________________________ CELL PHONE:______________________________ BOND #:_______________________________________ EXPIRATION DATE____________________ INTEREST EARNINGS ON THE ESCROW ACCOUNTS, IF ANY, ARE RETAINED BY THE CITY TO OFFSET THE ADMINISTRATIVE COSTS ASSOCIATED WITH PROCESSING THE ESCROW APPLICATION AND REFUND. I HEREBY APPLY FOR A BUILDING PERMIT AND I ACKNOWLEDGE THAT THE INFORMATION ABOVE IS COMPLETE AND ACCURATE; THAT THE WORK WILL BE IN CONFORMANCE WITH THE ORDINANCES AND CODES OF THE CITY AND WITH THE STATE BUILDING CODE, THAT I UNDERSTAND THIS IS NOT A PERMIT AND WORK IS NOT TO START WITHOUT A PERMIT AND THAT THE WORK WILL BE IN ACCORDANCE WITH THE APPROVED PLAN. NAME OF APPLICANT (Please Print)DATE APPLICANT’S SIGNATURE: www.lakevillemn.gov RESIDENTIAL BUILDING PERMIT APPLICATION PAGE 2 OFFICE USE ONLY BUILDING PERMIT TYPE REQUIRED INSPECTIONS SINGLE FAMILY DWELLING BUILDING DUPLEX AS BUILT TOWNHOUSE UNITS BUILDING FINAL DETACHED TOWN HOUSE UNIT DECK FOOTING CONDO FIREPLACE ACESSORY BUILDING FOOTING REROOF FOUNDATION RESIDE FRAMING PORCH FRAMING GARAGES INSULATION RES ADDN/REPAIR/RMDL DECK PORCH GARAGES LATH LOWER LEVEL FINISH LOWER LEVEL FINAL ADDITION OTHER FOUNDATION ONLY PORCH FOOTING MISCELLANEOUS POURED WALL DEMO SEPTIC TANK REMOVAL MOVED SITE MECHANICAL CITY BUILDING VALUATION: $AIR TEST FINAL BUILDING PERMIT FEES ROUGH-IN $PERMIT FEE PLUMBING $PLAN CHECK FINAL $SURCHARGE ROUGH-IN $METRO SAC METER SIZE $CITY WATER HOOKUP UNIT PRESSURE REDUCING VALVE $CITY SEWER HOOKUP UNIT SEWER/WATER $LANDSCAPE ESCROW SEWER/WATER $TREE ESCROW FINAL $MISC ESCROW STREET DRAINTILE $PLUMBING BUILDING INFORMATION $MECHANICAL TYPE OF CONSTRUCTION $SEWER WATER ZONING $OTHER CODE EDITION $TOTAL FIRE SUPPRESSION SYSTEM OCCUPANCY GROUP APPROVED BY: BUILDING INSPECTOR: Date: PLUMBING/MECHANICAL INSPECTOR: Date: COMMENTS: 20195 Holyoke Avenue, Lakeville, MN 55044 952-985-4400 952-985-4499 fax www.lakevillemn.gov Sewer & Water Tie Card Address:________________________________________ Contractor:______________________________________ Permit Number:__________________________________ Final Date:________________ Street Drain-Tile:______ Size of Water Service: 1” Comments: AIRTEST SANITARY OVER 20’/2 FITTINGS THIS CARD MUST BE COMPLETED AND ON-SITE AT TIME OF SEWER & WATER INSPECTION Copyright of these documents is owned by Robert Thomas Homes, Inc. and reserves ALL rights. These plans may not be re-used, copied or assigned to another party nor shall they be modified or used in part in other designs without the prior written consent of Robert Thomas Homes, Inc. OF SHEETPRODUCTION MODEL16452 DULUTH TRAIL, LAKEVILLE, MN 55044SBF22.04.03 - THE BROADMOOR - ELEVATION GDRAWN BY:MAO | R C.O... CUSTOMER 1/28/21 C.O.2/19/21 PERMIT 2/25/21 REVISIONS: ----.. 1-5 1 14 APPROXIMATE SQUARE FOOTAGE ABOVE GRADE FINISHED BELOW GRADE FINISHED Square footages are measured to the exterior finished surface of the outside walls. Square footage calculations were made based on plan dimensions only and may vary from the finished square footage of the house as built. In addition, plan dimensions are not exact and are subject to some variance. However, all construction shall be in substantial compliance with the Contract Documents. BELOW GRADE UNFINISHED GARAGE SQ. FT. SQ. FT. SQ. FT. SQ. FT. 3,720 1,711 705 797 Concept Approval ONLYSubject to Field Inspection Inspector Date 2020 MN Bldg Code 03/12/2021dmathews Copyright of these documents is owned by Robert Thomas Homes, Inc. and reserves ALL rights. These plans may not be re-used, copied or assigned to another party nor shall they be modified or used in part in other designs without the prior written consent of Robert Thomas Homes, Inc. OF SHEETPRODUCTION MODEL16452 DULUTH TRAIL, LAKEVILLE, MN 55044SBF22.04.03 - THE BROADMOOR - ELEVATION GDRAWN BY:MAO | R C.O... CUSTOMER 1/28/21 C.O.2/19/21 PERMIT 2/25/21 REVISIONS: ----.. 1-5 2 14 Copyright of these documents is owned by Robert Thomas Homes, Inc. and reserves ALL rights. These plans may not be re-used, copied or assigned to another party nor shall they be modified or used in part in other designs without the prior written consent of Robert Thomas Homes, Inc. OF SHEETPRODUCTION MODEL16452 DULUTH TRAIL, LAKEVILLE, MN 55044SBF22.04.03 - THE BROADMOOR - ELEVATION GDRAWN BY:MAO | R C.O... CUSTOMER 1/28/21 C.O.2/19/21 PERMIT 2/25/21 REVISIONS: ----.. 1-5 3 14 2.7 3 5 5 6 716" MIN. PLYWOOD/OSB EXTERIOR SHEATHING FASTENED TO STUDS w/ 8d NAILS @ 6" O.C. AT PANEL EDGES & @ 12" O.C. AT INTERIOR SUPPORTS PROVIDE DOUBLE STUDS FASTENED TO SIMPSON STHD14 HOLDOWN EMBEDDED IN CONCRETE (OR ALTERNATIVE HOLDOWN SHOWN IN 9/S2) UFER Ground -Provide 20' Rebar in footing and stub up near electrical service panel. WALL SECTION 4 S2 RETAINING WALL TYPE SPORT COURT FOUNDATION WALL (3) #4 LONGITUDINAL BARS AT TOP OF FOOTING #4 HORIZ. BARS @ 24" O.C. 10" C.I.P. CONCRETE WALL VERTICAL BAR OPTIONS: #4 BARS @ 24" O.C. OR #5 BARS @ 36" O.C. #4 BARS @ END & BEND OF HOOK 5'-0" HOOK OPTIONS: #5 HOOKS @ 18" O.C. OR #6 HOOKS @ 24" O.C. TRANSVERSE BARS OPTIONS: #5 BARS @ 24" O.C. OR #6 BARS @ 36" O.C. 10" THICK C.I.P. CONCRETE FOOTING 1'-6"3'-6"2" TO VERTICAL BARS & HOOKS 1'-6" 4'-0" FRAME WALL ABOVE BY SUPPLIER 2"3"8'-4" MAX.6" MIN. SLAB-ON-GRADE CONTRACTOR MAY USE 8" WALL CONSTRUCTED SIMILAR TO BELOW w/ THE FOLLOWING CHANGES: ·5'-0" HOOK OPTIONS: #5 HOOKS @ 12" O.C. OR #6 HOOKS @ 18" O.C. ·VERTICAL BAR OPTIONS: #5 BARS @ 24" O.C. OR #6 BARS @ 36" O.C. WOOD WALL12"Ø x 10" LONG ANCHOR BOLTS (7" MIN. EMBED) @ 48" O.C. MAX. OR EQUIV. SLOPE GRADE AWAY FROM FOUNDATION (GARAGE SLAB AT SIM. w/ OPTIONAL SLAB LEDGE) TREATED 2x8 SILL PLATE w/ 112" MAX. OVERHANG WALL SECTION 5 S2 RETAINING WALL TYPE SPORT COURT FOUNDATION WALL - LOW GRADE TO BE LOCATED IN THE FIELD AS REQUIRED AND ALLOWED WITH SITE GRADE #4 HORIZ. BARS @ 24" O.C. 8" OR 10" C.I.P. CONCRETE WALL #4 VERTICAL BARS @ 36" O.C. #4 BARS @ END & BEND OF HOOK 4'-0" HOOK OPTIONS: #4 HOOKS @ 18" O.C. OR #6 HOOKS @ 36" O.C. 10" THICK C.I.P. CONCRETE FOOTING 1'-0"3'-0"2" TO VERTICAL BARS & HOOKS 1'-0" 2'-6" SLOPE GRADE AWAY FROM FOUNDATION 3"8'-4" MAX.36"MIN. SLAB-ON-GRADE 12"Ø x 10" LONG ANCHORBOLTS (7" MIN. EMBED) @ 48" O.C. MAX. OR EQUIV. WOOD WALLFRAME WALL ABOVE BY SUPPLIER TREATED 2x8 SILL PLATE w/ 112" MAX. OVERHANG 3'-6" MAX.6" MIN. SLOPE GRADE AWAY FROM FOUNDATION 20" MIN. WIDE x 8" MIN. THICK CONCRETE FOOTING CENTERED UNDER WALL SLAB-ON-GRADE #4 HORIZ. BAR @ TOP OF WALL 8" C.I.P. CONCRETE WALL #4 x 2'-0" DOWELS (5" MIN. EMBED) CENTERED IN WALL @ 24" O.C. DOWELS MUST BE WET SET OR DRILLED AND EPOXY GROUTED 12"Ø x 10" LONG ANCHORBOLTS (7" MIN. EMBED) @ 48" O.C. MAX. WALL SECTION 6 S2 LOOKOUT FOUNDATION WALL TO BE LOCATED IN THE FIELD AS REQUIRED AND ALLOWED WITH SITE GRADE TREATED 2x8 SILL PLATE w/ 112" MAX. OVERHANG SEE 2/S1 FOR TALL WOOD WALL FRAMING PROVIDE DOUBLE STUDS FASTENED TO SIMPSON STHD14 HOLDOWN EMBEDDED IN CONCRETE (OR ALTERNATIVE HOLDOWN SHOWN IN 9/S2) Copyright of these documents is owned by Robert Thomas Homes, Inc. and reserves ALL rights. These plans may not be re-used, copied or assigned to another party nor shall they be modified or used in part in other designs without the prior written consent of Robert Thomas Homes, Inc. OF SHEETPRODUCTION MODEL16452 DULUTH TRAIL, LAKEVILLE, MN 55044SBF22.04.03 - THE BROADMOOR - ELEVATION GDRAWN BY:MAO | R C.O... CUSTOMER 1/28/21 C.O.2/19/21 PERMIT 2/25/21 REVISIONS: ----.. 1-5 4 14ATTICACCESS53 5 5 5 5 5 5 5 PFH PFH 2.75 2.25 3.75 3 55 5 5 5 5 3.25 2.5 2.5 5.5 716" MIN. PLYWOOD/OSB EXTERIOR SHEATHING FASTENED TO STUDS w/ 8d NAILS @ 6" O.C. AT PANEL EDGES & @ 12" O.C. AT INTERIOR SUPPORTS WITH LOOKOUT FOUNDATION WALL BELOW,SPORTCOURT EXTERIOR TALL WOOD WALL TO BE CONSTRUCTED AS FOLLOWS: ·2x6 @ 16" O.C. TYPICAL FULL HEIGHT WALL FRAMING (BALLOON FRAMED) ·PROVIDE 2x BLOCKING BETWEEN STUDS AT MID-HEIGHT OF WALL ·PROVIDE (1) 2x6 BEARING STUD & (1) 2x6 FULL HEIGHT KING STUD EACH SIDE OF WINDOW OPENING BWPs Above BWPs Above17'-558"± MAX.2x6 LSL/LVL STUDS @ 16" O.C. TYP. TALL WALL FRAMING PROVIDE 2x BLOCKING AT MID-HEIGHT OF WALL WALL ELEVATION 2 S2 TYPICAL TALL WALL WALL ELEVATION 3 S2 4'-0" WIDE WINDOW FRAMING 2x6 STUDS @ 16" O.C. TYP INFILL FRAMING HEADER BY SUPPLIER CONTINUE 2x BLOCKING THROUGH INFILL FRAMING PROVIDE SIMPSON A35 FRAMING ANGLES AT TOP & BOTTOM OF KING STUDS (4 THUS PER OPENING) (1) 2x6 LSL/LVL BEARING STUD & (2) 2x6 LSL OR (1) 2x6 LVL FULL HEIGHT KING STUDS EACH SIDE OF OPENING WALL TOP PLATES MAY BE STANDARD SPF MATERIAL WALL BOTTOM PLATE MAY BE STANDARD SYP MATERIAL Copyright of these documents is owned by Robert Thomas Homes, Inc. and reserves ALL rights. These plans may not be re-used, copied or assigned to another party nor shall they be modified or used in part in other designs without the prior written consent of Robert Thomas Homes, Inc. OF SHEETPRODUCTION MODEL16452 DULUTH TRAIL, LAKEVILLE, MN 55044SBF22.04.03 - THE BROADMOOR - ELEVATION GDRAWN BY:MAO | R C.O... CUSTOMER 1/28/21 C.O.2/19/21 PERMIT 2/25/21 REVISIONS: ----.. 1-5 5 14 ATTICACCESS W/ LIGHT, SWITCH, & OUTLET Temper if within 60" of floor 3 3.2 3 3 2.5 2.5 2.5 -Min. 15" clearance to any obstruction from center of W.C., 24" in front(typ). Copyright of these documents is owned by Robert Thomas Homes, Inc. and reserves ALL rights. These plans may not be re-used, copied or assigned to another party nor shall they be modified or used in part in other designs without the prior written consent of Robert Thomas Homes, Inc. OF SHEETPRODUCTION MODEL16452 DULUTH TRAIL, LAKEVILLE, MN 55044SBF22.04.03 - THE BROADMOOR - ELEVATION GDRAWN BY:MAO | R C.O... CUSTOMER 1/28/21 C.O.2/19/21 PERMIT 2/25/21 REVISIONS: ----.. 1-5 6 14 Copyright of these documents is owned by Robert Thomas Homes, Inc. and reserves ALL rights. These plans may not be re-used, copied or assigned to another party nor shall they be modified or used in part in other designs without the prior written consent of Robert Thomas Homes, Inc. OF SHEETPRODUCTION MODEL16452 DULUTH TRAIL, LAKEVILLE, MN 55044SBF22.04.03 - THE BROADMOOR - ELEVATION GDRAWN BY:MAO | R C.O... CUSTOMER 1/28/21 C.O.2/19/21 PERMIT 2/25/21 REVISIONS: ----.. 1-5 7 14 Copyright of these documents is owned by Robert Thomas Homes, Inc. and reserves ALL rights. These plans may not be re-used, copied or assigned to another party nor shall they be modified or used in part in other designs without the prior written consent of Robert Thomas Homes, Inc. OF SHEETPRODUCTION MODEL16452 DULUTH TRAIL, LAKEVILLE, MN 55044SBF22.04.03 - THE BROADMOOR - ELEVATION GDRAWN BY:MAO | R C.O... CUSTOMER 1/28/21 C.O.2/19/21 PERMIT 2/25/21 REVISIONS: ----.. 1-5 8 14 Copyright of these documents is owned by Robert Thomas Homes, Inc. and reserves ALL rights. These plans may not be re-used, copied or assigned to another party nor shall they be modified or used in part in other designs without the prior written consent of Robert Thomas Homes, Inc. OF SHEETPRODUCTION MODEL16452 DULUTH TRAIL, LAKEVILLE, MN 55044SBF22.04.03 - THE BROADMOOR - ELEVATION GDRAWN BY:MAO | R C.O... CUSTOMER 1/28/21 C.O.2/19/21 PERMIT 2/25/21 REVISIONS: ----.. 1-5 9 14 Copyright of these documents is owned by Robert Thomas Homes, Inc. and reserves ALL rights. These plans may not be re-used, copied or assigned to another party nor shall they be modified or used in part in other designs without the prior written consent of Robert Thomas Homes, Inc. OF SHEETPRODUCTION MODEL16452 DULUTH TRAIL, LAKEVILLE, MN 55044SBF22.04.03 - THE BROADMOOR - ELEVATION GDRAWN BY:MAO | R C.O... CUSTOMER 1/28/21 C.O.2/19/21 PERMIT 2/25/21 REVISIONS: ----.. 1-5 10 14 Copyright of these documents is owned by Robert Thomas Homes, Inc. and reserves ALL rights. These plans may not be re-used, copied or assigned to another party nor shall they be modified or used in part in other designs without the prior written consent of Robert Thomas Homes, Inc. OF SHEETPRODUCTION MODEL16452 DULUTH TRAIL, LAKEVILLE, MN 55044SBF22.04.03 - THE BROADMOOR - ELEVATION GDRAWN BY:MAO | R C.O... CUSTOMER 1/28/21 C.O.2/19/21 PERMIT 2/25/21 REVISIONS: ----.. 1-5 11 141/4"1-1/2"HOUSE 1" END OF PORCH 1" END OF DECK Copyright of these documents is owned by Robert Thomas Homes, Inc. and reserves ALL rights. These plans may not be re-used, copied or assigned to another party nor shall they be modified or used in part in other designs without the prior written consent of Robert Thomas Homes, Inc. OF SHEETPRODUCTION MODEL16452 DULUTH TRAIL, LAKEVILLE, MN 55044SBF22.04.03 - THE BROADMOOR - ELEVATION GDRAWN BY:MAO | R C.O... CUSTOMER 1/28/21 C.O.2/19/21 PERMIT 2/25/21 REVISIONS: ----.. 1-5 12 14 CFL INCANDESCENT LED LED LED LED LOW VOLTAGE LED Copyright of these documents is owned by Robert Thomas Homes, Inc. and reserves ALL rights. These plans may not be re-used, copied or assigned to another party nor shall they be modified or used in part in other designs without the prior written consent of Robert Thomas Homes, Inc. OF SHEETPRODUCTION MODEL16452 DULUTH TRAIL, LAKEVILLE, MN 55044SBF22.04.03 - THE BROADMOOR - ELEVATION GDRAWN BY:MAO | R C.O... CUSTOMER 1/28/21 C.O.2/19/21 PERMIT 2/25/21 REVISIONS: ----.. 1-5 13 14ATTICACCESSCFL INCANDESCENT LED LED LED LED LOW VOLTAGE LED Copyright of these documents is owned by Robert Thomas Homes, Inc. and reserves ALL rights. These plans may not be re-used, copied or assigned to another party nor shall they be modified or used in part in other designs without the prior written consent of Robert Thomas Homes, Inc. OF SHEETPRODUCTION MODEL16452 DULUTH TRAIL, LAKEVILLE, MN 55044SBF22.04.03 - THE BROADMOOR - ELEVATION GDRAWN BY:MAO | R C.O... CUSTOMER 1/28/21 C.O.2/19/21 PERMIT 2/25/21 REVISIONS: ----.. 1-5 13 13 ATTIC ACCESS W/ LIGHT, SWITCH, & OUTLET CFL INCANDESCENT LED LED LED LED LOW VOLTAGE LED ©DescriptionDateRevisionFebruary 17, 2021Project Number:Date:1.052S11Sheets: of2Print Name:License Number:Garrett Brunell2-17-2152600Date:Robert Thomas Homes, Inc.16972 Brandtjen Farm DriveLakeville, MN 550443407 Kilmer Lane NSuite 4Plymouth, MN 55441Tel 612-708-3572www.hansongroupmn.comPLANS SHOWN LIGHT IN BACKGROUND ARE FORLOCATION REFERENCE ONLY. PLAN NOTES ANDELEMENTS SHOWN LIGHT MAY NOT NECESSARILYSUPPORT THE HANSON GROUP'S DESIGN.Single Family Residence16452 Duluth TrailLakeville, MNPARTIAL LOWER LEVEL HOUSE PLANSHOWN FOR LOCATION REFERENCE ONLY1S1REFERENCE PLANMAIN LEVEL HOUSE PLAN SHOWNFOR LOCATION REFERENCE ONLY2S1REFERENCE PLANUPPER LEVEL HOUSE PLAN SHOWNFOR LOCATION REFERENCE ONLY3S1REFERENCE PLANCOPYRIGHT HANSON GROUP, LLC 2021INDICATES EXTERIOR BRACED WALL PANEL w/ SHEATHING ON EXTERIOR FACE IN ACCORDANCE w/ FRAMING NOTE 1.PROVIDE INCREASED FASTENING REQUIREMENTS AS SHOWN BELOW.INDICATES ENGINEERED WIND RESISTING ELEMENTS TO BE CONSTRUCTED AS SHOWN IN THE DETAIL SHEETS.(MIN. LENGTH)(MIN. LENGTH)THESE SHEETS REPRESENT A COMPLETE DESIGN OF THE "MAIN WINDFORCE RESISTING SYSTEM" FOR THE ENTIRE RESIDENTIAL STRUCTURE.THE LOCATION AND LENGTH OF EACH BRACED WALL PANEL AND ENGINEERED WIND RESISTING ELEMENT THAT IS REQUIRED FOR THE HANSONGROUP'S DESIGN IS SHOWN ON THE STRUCTURAL DRAWINGS. WALLS NOT SPECIFICALLY LABELED ON THE PLANS MAY BE STANDARD FRAMING.ROOFTRUSSESBRACEDWALL PANELFLAT 2x6 @ 24" O.C.(MIN. (3) PER BRACEDWALL PANEL)SIMPSONA35FRAMINGANGLEEACH END(4) 0.131"Øx 3" NAILSBRACEDWALL PANEL(4) 0.131"Øx 3" NAILSSIMPSONLTP4FRAMINGPLATEEACH ENDFLOORTRUSSESFLAT 2x6 @ 24" O.C.(MIN. (3) PER BRACEDWALL PANEL)BRACEDWALL PANEL(4) 0.131"Øx 3" NAILSSIMPSONLTP4FRAMINGPLATEEACH ENDFLOORTRUSSESFLAT 2x6 @ 24" O.C.(MIN. (3) PER BRACEDWALL PANEL)BRACED WALL CONNECTIONBRACED WALL CONNECTION(ROOF TRUSSES)(FLOOR TRUSSES)DETAILS SHOWN ABOVE AREALTERNATIVE CONNECTIONS TO BEUSED WHEN BRACED WALL PANELDOES NOT ALIGN WITH FRAMING.INDICATES INTERIOR BRACED WALL PANEL w/ GYPSUM SHEATHING BOTH FACES WITH EITHER FASTENER OPTION LISTED INFRAMING NOTE 2, SPACED AT 4" O.C. PROVIDE INCREASED FASTENING REQUIREMENTS AS SHOWN BELOW.SECTIONS SHOWN DEPICT CONNECTIONS OF BRACED WALL PANELS TO ROOF TRUSSESABOVE, TO TRUSSES/BLOCKING ABOVE, AND TO TRUSSES/BLOCKING BELOW. THESE PANELSARE NOT NECESSARILY REQUIRED TO ALIGN, BUT MAY DEPENDING ON PLAN LAYOUT.EXTERIOR NON-BEARING WALLFRAME 2x4 BOXAROUND SPACEBETWEEN TRUSS w/SAME SHEATHINGAND FASTENING ASWALL BELOW(OR REPLACE w/ADEQUATE DEPTH2x MEMBER)#12 x 312" WOODSCREWS @ 16" O.C.INSTALLED INADDITION TO NAILS(MAIN/UPPERLEVEL ROOFTRUSS BEARINGWALLS ONLY)EXTERIOR BEARING WALLREPRESENTSFIGURER602.10.8.2(3)w/ TRUSSESw/ TRUSSESROOF TRUSSESFASTENED TO PLATESw/ (4) 0.131"Ø x 3"TOENAILS & SIMPSONH2.5 CLIPNAIL BOTTOM PLATETO RIBBON BRACE /TRUSS w/ (3) 16dNAILS EVERY 16"2x4 BLOCKINGBETWEENTRUSSES NAILEDTO TOP PLATESw/ (3) 0.131"Ø x 3"NAILS EACHNAIL EACH TRUSS TOTOP PLATES w/ (3)0.131"Ø x 3" TOENAILSROOF TRUSSFASTENED TOPLATES w/0.131"Ø x 3"TOENAILS@ 6" O.C.NAIL BOTTOMPLATE TO LADDERTRUSS w/ (3) 16dNAILS EVERY 16"NAIL LADDERTRUSS TO TOPPLATES w/0.131"Ø x 3"NAILS @ 6" O.C.w/ TRUSSESw/ TRUSSESINTERIOR WALLPERPENDICULAR TO FRAMINGINTERIOR WALLPARALLEL w/ FRAMING2x4 BLOCKING BETWEENROOF TRUSSES NAILEDTO TOP PLATES w/ (3)0.131"Ø x 3" NAILS EACHNAIL BOTTOM PLATE TOBLOCKING w/ (3) 16dNAILS EVERY 16"PROVIDE FULL DEPTHBLOCKING BETWEEN TRUSSESNAILED TO TOP PLATES w/(3) 0.131"Ø x 3" NAILS EACHNAIL EACH TRUSS TO TOP PLATEw/ (3) 0.131"Ø x 3" TOENAILSPROVIDE ROOF TRUSSDIRECTLY IN LINE w/BRACED WALL PANELFASTENED TO PLATESw/ 0.131"Ø x 3"TOENAILS @ 6" O.C.NAIL BOTTOM PLATETO BLOCKING w/ (3)16d NAILS EVERY 16"PROVIDE TRUSS DIRECTLYIN LINE w/ BRACED WALLPANEL FASTENED TOPLATES w/ 0.131"Ø x 3"TOENAILS @ 6" O.C.NAIL BOTTOM PLATE w/(3) 16d NAILS EVERY 16"(OR AS SHOWN TOTHE RIGHT IF REQ'D)FASTEN PLATE w/ 14" CONCRETESCREWS OR POWDERACTUATED 0.145" WASHEREDPINS @ 16" O.C. w/ 1"EMBEDMENT IN CONCRETEPROJECT SCOPEDESIGN AND DETAIL OF THE REQUIRED MAIN WINDFORCE RESISTING SYSTEM, TALLSPORTCOURT WOOD WALL FRAMING, AND FOUNDATION WALLS ALONG A SPORT COURT FOR ASINGLE-FAMILY RESIDENCE. CONSTRUCTION IS TO BE IN ACCORDANCE WITH THISDOCUMENT, STANDARD INDUSTRY PRACTICE, AND THE CODE.GENERAL NOTES1.THESE DOCUMENTS APPLY TO STRUCTURAL ONLY. REFER TO HOUSE PLANS PREPAREDBY ROBERT THOMAS HOMES LAST DATED 1-28-21 FOR MORE INFORMATION.2.THE HANSON GROUP'S ENGINEERING IS LIMITED TO THE ITEMS LISTED IN THE PROJECTSCOPE ABOVE. THE DESIGN OF THE REMAINING HOME IS BY OTHERS.3.ADEQUATE SHORING DURING CONSTRUCTION IS THE RESPONSIBILITY OF THECONTRACTOR.4.CONTRACTOR AND BUILDER ARE TO VERIFY ALL DIMENSIONS AND CONDITIONS BEFOREPROCEEDING WITH WORK. NOTIFY THE HANSON GROUP IF DISCREPANCIES ARISE.5.MEANS AND METHODS OF CONSTRUCTION ARE THE RESPONSIBILITY OF THE CONTRACTOR.MATERIALSCONCRETE FOOTINGS: F'c = 5,000 PSI @ 28 DAYS (OR 3,500 PSI WITH AN APPROVED ADMIXTURE THATPROVIDES A WATER AND VAPOR RESISTANCEAT LEAST EQUIVALENT TO 5,000 PSI CONCRETE)CONCRETE WALLS: F'c = 3,500 PSI @ 28 DAYSREINFORCING STEEL: ASTM A615 GRADE 60AGGREGATE: FOOTINGS - 112" MAX WALLS/SLABS- 34" MAXON-SITE SOIL:CLAY (GROUP III ASSUMED)geq = 60 PSF/FT (ACTIVE)ALLOWABLE SOILBEARING PRESSURE: 2,000 PSF (ASSUMED)WALL STUDS (10' OR LESS):SPF STUD GRADE OR BETTERWALL STUDS (OVER 10'):SPF NO.2 GRADE OR BETTERLSL STUDS:112" WIDTH - E=1,300,000 PSI OR BETTERDIMENSIONAL LUMBER:SPF NO.2 GRADE OR BETTERTREATED LUMBER:SYP NO.2 GRADE OR BETTERLSL BEAMS:134" WIDTH - E=1,550,000 PSI OR BETTERLVL:134" WIDTH - E=1,900,000 PSI OR BETTERLOADSROOF LIVE LOAD: 35 PSF (SNOW)ROOF DEAD LOAD:15 PSFFLOOR LIVE LOAD:40 PSFFLOOR DEAD LOAD:15 PSFWIND LOAD:115 MPH ULTIMATE EXP. BCODES2020 MINNESOTA RESIDENTIAL CODEFOUNDATION NOTES1.DRAIN TILE, DAMPPROOFING AND/OR WATERPROOFING, & INSULATION, AS WELL AS THEIRINSTALLATION, ARE TO BE IN ACCORDANCE WITH THE CODE.2.INSTALL A MINIMUM OF (2) ANCHORS PER PORTION OF SILL PLATE AS WELL AS AN ANCHORWITHIN 12" OF EACH END AS APPLICABLE.3.BAR SPLICES ARE TO BE LAPPED A MINIMUM OF 48 BAR DIAMETERS. PROVIDE 48" MATCHINGHOOK BARS FOR ALL HORIZONTAL BARS AT WALL CORNERS AND INTERSECTIONS.4.CARE IS TO BE TAKEN DURING BACKFILLING TO MAINTAIN A PLUMB WALL ALIGNMENT.RETAINING WALL FOUNDATIONS RELY ON SLAB-ON GRADE FOR LATERAL RESISTANCE.ADEQUATE TEMPORARY BRACING IS BY OTHERS UNTIL SLAB IS IN PLACE AND FULLY CURED.5.BULKHEAD STEP ALL RETAINING WALL TYPE FOOTING ELEVATION CHANGES. DO NOT JUMPFOOTINGS AT THESE LOCATIONS.FRAMING NOTES1.ALL EXTERIOR WALLS ARE TO BE CONSTRUCTED IN ACCORDANCE WITH THE FOLLOWING CRITERIA,U.N.O., WHICH MEETS OR EXCEEDS THE REQUIREMENTS OF CODE SECTION R602.10.4-WSP AND CS-WSP.A.2x6 STUDS SPACED @ 16" O.C.B.EXTERIOR SHEATHING: 716" MIN. STRUCTURAL PANEL SHEATHING w/ 8d COMMON NAILS @ 6" O.C ATPANEL EDGES AND 12" O.C. AT INTERMEDIATE SUPPORTS OR 134" 16 GAUGE STAPLES @ 3" / 6"SPACING.2.ALL INTERIOR WALLS ARE TO BE CONSTRUCTED IN ACCORDANCE WITH THE FOLLOWING CRITERIA,U.N.O.A.2x4 OR 2x6 STUDS SPACED @ 16" O.C.B.WALL SHEATHING: 12" MIN. GYPSUM SHEATHING FASTENED TO FRAMING w/ 5d COOLER NAILS @ 8"O.C. MAX. OR TYPE S/W WALLBOARD SCREWS @ 16" O.C. MAX. (58" MINIMUM STUD PENETRATION)3.ALL FLOORS ARE TO BE CONSTRUCTED IN ACCORDANCE WITH THE FOLLOWING CRITERIA.A.FLOOR FRAMING SPACED AT A MAXIMUM OF 24" O.C.B.FLOOR SHEATHING: 34" STRUCTURAL PANEL SHEATHING w/ 8d COMMON NAILS @ 6" O.C AT PANELEDGES AND 12" O.C. AT INTERMEDIATE SUPPORTS.4.ALL ROOFS ARE TO BE CONSTRUCTED IN ACCORDANCE WITH THE FOLLOWING CRITERIA.A.ROOF FRAMING SPACED AT A MAXIMUM OF 24" O.C.B.FASTEN ALL ROOF FRAMING TO TOP PLATES WITH SIMPSON H2.5 CLIP OR EQUIVALENT AND (4) 0.131"Øx 3" TOENAILS.C.ROOF SHEATHING: 12" STRUCTURAL PANEL SHEATHING w/ 8d COMMON NAILS @ 6" O.C AT PANELEDGES AND 12" O.C. AT INTERMEDIATE SUPPORTS OR 134" 16 GAUGE STAPLES @ 3" / 6" SPACING.5.ALONG LENGTH OF WALLS, LAP WALL TOP PLATES A MINIMUM OF 24" AND FASTEN TOGETHER WITH (12)0.131"Ø x 3" IN LAP ZONE. AT CORNERS AND INTERSECTIONS, LAP PLATES AND PROVIDE (3) 0.131"Ø x 3"FACE NAILS.6.CONNECTIONS NOT SPECIFICALLY NOTED ARE TO BE IN ACCORDANCE WITH CODE TABLE R602.3(1).7.TALL WOOD WALL FRAMING IS DESIGNED TO MEET H/180 DEFLECTION CRITERIA AT A MINIMUM.8.THE ENTRY PORCH AND DECK ARE CONSIDERED TO BE PRIMARILY OPEN, NON-ESSENTIAL PORTIONS OFTHE STRUCTURE AND ARE EXCLUDED FROM THE OVERALL MAIN WINDFORCE SYSTEM OF THE HOME.PROVIDE CODE REQUIRED UPLIFT CONNECTIONS AT ALL POSTS AND TENSION CONNECTIONS ATLEDGERS.BRACED WALL LINE (5-FT) (3-FT)(2.7-FT)716" MIN. PLYWOOD/OSBEXTERIOR SHEATHINGFASTENED TO STUDS w/ 8dNAILS @ 6" O.C. AT PANELEDGES & @ 12" O.C. ATINTERIOR SUPPORTS7S2PROVIDE DOUBLE STUDSFASTENED TO SIMPSONSTHD14 HOLDOWNEMBEDDED IN CONCRETE(OR ALTERNATIVEHOLDOWN SHOWN IN 9/S2)SEE 2/S2 & 3/S2 FORWOOD TALL WALLREQUIREMENTS4S2SIM.4 S2 5 S2 6 S2PROVIDE DOUBLE STUDSFASTENED TO SIMPSONSTHD14 HOLDOWNEMBEDDED IN CONCRETE(OR ALTERNATIVEHOLDOWN SHOWN IN 9/S2)(5-FT)BRACEDWALL LINE(4-FT)(6-FT)BRACEDWALL LINEBRACED WALL LINE BRACED WALL LINE BRACED WALL LINE BRACEDWALL LINEBRACEDWALL LINEBRACED WALL LINE (5-FT)(3.25-FT) (2.625-FT)(2.625-FT) (5-FT) ONE SIDED (5-FT)(5-FT)(5-FT) (3.75-FT) (2.75-FT)(5-FT)(5-FT)(4-FT)(5-FT)(5-FT)(5.5-FT)CONSTRUCTPORTAL FRAME ASSHOWN IN 1/S2(5-FT)(5-FT)(2.25-FT)(3-FT)(5-FT)(5-FT) ONE SIDED (3-FT)(5-FT)SEE 2/S2 & 3/S2 FORWOOD TALL WALLREQUIREMENTS716" MIN. PLYWOOD/OSBEXTERIOR SHEATHINGFASTENED TO STUDS w/ 8dNAILS @ 6" O.C. AT PANELEDGES & @ 12" O.C. ATINTERIOR SUPPORTSWITH LOOKOUT FOUNDATION WALL BELOW,SPORTCOURTEXTERIOR TALL WOOD WALL TO BE CONSTRUCTED AS FOLLOWS:·2x6 @ 16" O.C. TYPICAL FULL HEIGHT WALL FRAMING (BALLOONFRAMED)·PROVIDE 2x BLOCKING BETWEEN STUDS AT MID-HEIGHT OFWALL·PROVIDE (1) 2x6 BEARING STUD & (1) 2x6 FULL HEIGHT KINGSTUD EACH SIDE OF WINDOW OPENING(4-FT)BRACED WALL LINE (4-FT)(4-FT)(4-FT)(4-FT)(4-FT)(4-FT)(4-FT)(4-FT) (3-FT) (2.5-FT) BRACED WALL LINE BRACEDWALL LINEBRACED WALL LINE BRACEDWALL LINE(2.5-FT)(3-FT)(2.5-FT)(4-FT)(4-FT)(4-FT)(3-FT) (3.2-FT)Signed: I hereby certify that this plan, specification or reportwas prepared by me or under my direct supervisionand that I am a duly Licensed Professional Engineerunder the laws of the State of Minnesota.BRACED WALL LINEBRACEDWALL LINE COPYRIGHT HANSON GROUP, LLC 2021©DescriptionDateRevisionProject Number:Date:S22Sheets: of2Print Name:License Number:Garrett Brunell52600Date:Robert Thomas Homes, Inc.16972 Brandtjen Farm DriveLakeville, MN 550443407 Kilmer Lane NSuite 4Plymouth, MN 55441Tel 612-708-3572www.hansongroupmn.comPOST-INSTALLED HOLDOWN OPTION9S2FRAMING DETAILS2FRAMING DETAILGARAGE FRONT PORTAL FRAME1NOTEINFO APPLIES SYMMETRICALLY ACROSS DETAIL.BRACED WALL PANELFASTEN BOTTOM PLATE TORIBBON BRACE / TRUSS w/(3) 16d NAILS EVERY 16" O.C.CANTILEVERED FLOORTRUSS BY SUPPLIERFRAMEWALL / BRACEDWALL PANEL BELOWBLOCKING BETWEEN TRUSSES AS FOLLOWS:·FLAT 2x4 TOP & BOTTOM·34" PLYWOOD SHEET NAILED TO 2x4's w/(8) 8d NAILS TOP & BOTTOM·CIRCULAR HOLE UP TO 8"Ø MAY BE CUTINTO CENTER OF PLYWOODNAIL FLOOR SHEATHING TOBLOCKING w/ 8d NAILS @ 6" O.C.FASTEN BOTTOM 2x4 w/ (3) 16dNAILS EVERY 16" O.C. SECTION 8S2AT BRACED WALL PANELS ABOVECANTILEVERED FLOOR FRAMINGCONCRETEFOUNDATIONBELOWSIMPSON HTT5HOLDOWN ANCHOR ATLOCATIONS SHOWN w/12"Ø x 12" LONGSIMPSON TITEN HDSCREW-IN ANCHOR1'-1012"±16'-3"±9'-518" ±FASTEN TOP PLATE TO HEADER w/ (2)ROWS 16d SINKER NAILS @ 3" O.C.(1) 2x6 BEARING STUD & (1) 2x6 FULLHEIGHT STUD EACH END OF HEADERLOCATE PANEL JOINT WITHIN 2'-0" FROMCENTER OF HEADER HEIGHT AS REQ'D (2xSOLID BLOCKING REQUIRED AT SHEATHINGJOINT)(3) 2x6 BEARING STUDS MIN.(VERIFY w/ SUPPLIER)SIMPSON STHD14 EMBEDDED HOLDOWNANCHOR AT LOCATIONS SHOWN(REFER TO 9/S2 FOR ALTERNATIVE OPTIONS)FOUNDATION WALL BELOWLENGTH OF CONTINUOUS HEADER58" Ø ANCHOR BOLT (7" MIN. EMBED)w/ 2" x 2" x 316" PLATE WASHERNAIL SHEATHING TO HEADER w/ 8dNAILS @ 3" O.C. EA. WAY TYP.SMALL HATCH AREA INDICATES 716" ORTHICKER PLYWOOD OR OSB SHEATHINGAPPLIED TO EXTERIOR SIDE OF STUDS(NAIL SHEATHING AROUND PERIMETER w/ (2)ROWS 8d NAILS @ 3" O.C. STAGGERED & TOPLATES / BLOCKING @ 3" O.C.)SIMPSON MSTC40 STRAP ON INSIDE FACEOF WALL (PROVIDE SPACER TO FLUSHOUT HEADER TO WALL STUD THICKNESS)FASTEN KING STUD TO HEADER w/(2) ROWS 16d SINKER NAILS @ 3" O.C.1'-1012"±CONTINUOUS LVL HEADER TO SUPPORTVERTICAL LOADS BY SUPPLIER(MIN.312" WIDTH & MIN.1114" DEPTH REQ'D)PROVIDE 2x6 INFILL WALL ABOVE HEADER AS REQ'DLARGE HATCH AREA INDICATES 716" OR THICKERPLYWOOD OR OSB SHEATHING APPLIED TO EXTERIORSIDE OF STUDS w/ STANDARD 6"/12" NAILINGFASTEN FRAMING ABOVE AS SHOWNFOR BRACED WALL PANELS17'-55 8"± MAX.2x6 LSL/LVL STUDS @ 16" O.C.TYP. TALL WALL FRAMINGPROVIDE 2x BLOCKINGAT MID-HEIGHT OF WALL WALL ELEVATION 2S2TYPICAL TALL WALL WALL ELEVATION 3S24'-0" WIDE WINDOW FRAMING2x6 STUDS @ 16" O.C. TYPINFILL FRAMINGHEADER BY SUPPLIERCONTINUE 2x BLOCKINGTHROUGH INFILL FRAMINGPROVIDE SIMPSON A35FRAMING ANGLES AT TOP& BOTTOM OF KING STUDS(4 THUS PER OPENING)(1) 2x6 LSL/LVL BEARING STUD &(2) 2x6 LSL OR (1) 2x6 LVL FULL HEIGHTKING STUDS EACH SIDE OF OPENINGWALL TOP PLATESMAY BE STANDARDSPF MATERIALWALL BOTTOM PLATEMAY BE STANDARDSYP MATERIAL WALL SECTION 4S2 RETAINING WALL TYPE SPORTCOURT FOUNDATION WALL WALL SECTION 5S2 RETAINING WALL TYPE SPORT COURTFOUNDATION WALL - LOW GRADETO BE LOCATED IN THE FIELD AS REQUIREDAND ALLOWED WITH SITE GRADE(3) #4 LONGITUDINAL BARSAT TOP OF FOOTING#4 HORIZ. BARS@ 24" O.C.10" C.I.P. CONCRETE WALLVERTICAL BAR OPTIONS:#4 BARS @ 24" O.C.OR #5 BARS @ 36" O.C.#4 BARS @ END &BEND OF HOOK5'-0" HOOK OPTIONS:#5 HOOKS @ 18" O.C. OR#6 HOOKS @ 24" O.C.TRANSVERSE BARS OPTIONS:#5 BARS @ 24" O.C. OR#6 BARS @ 36" O.C.10" THICK C.I.P.CONCRETE FOOTING1'-6"3'-6"2" TO VERTICAL BARS & HOOKS1'-6"4'-0"FRAME WALL ABOVE BY SUPPLIER2"3"8'-4" MAX.6"MIN.SLAB-ON-GRADECONTRACTOR MAY USE 8" WALL CONSTRUCTEDSIMILAR TO BELOW w/ THE FOLLOWING CHANGES:·5'-0" HOOK OPTIONS:#5 HOOKS @ 12" O.C. OR #6 HOOKS @ 18" O.C.·VERTICAL BAR OPTIONS:#5 BARS @ 24" O.C. OR #6 BARS @ 36" O.C.#4 HORIZ. BARS@ 24" O.C.8" OR 10" C.I.P. CONCRETE WALL#4 VERTICAL BARS@ 36" O.C.#4 BARS @ END &BEND OF HOOK4'-0" HOOK OPTIONS:#4 HOOKS @ 18" O.C. OR#6 HOOKS @ 36" O.C.10" THICK C.I.P.CONCRETE FOOTING1'-0"3'-0"2" TO VERTICAL BARS & HOOKS1'-0"2'-6"SLOPE GRADE AWAYFROM FOUNDATION3" 8'-4" MAX.36"MIN.SLAB-ON-GRADE12"Ø x 10" LONG ANCHORBOLTS (7" MIN. EMBED)@ 48" O.C. MAX. OR EQUIV. WOOD WALL WOOD WALL12"Ø x 10" LONG ANCHORBOLTS (7" MIN. EMBED)@ 48" O.C. MAX. OR EQUIV.SLOPE GRADE AWAYFROM FOUNDATION(GARAGE SLAB AT SIM. w/OPTIONAL SLAB LEDGE)TREATED 2x8 SILL PLATEw/ 112" MAX. OVERHANGFRAME WALL ABOVE BY SUPPLIERTREATED 2x8 SILL PLATEw/ 112" MAX. OVERHANG WALL SECTION 7S2WALKOUT SPORT COURTFOUNDATION WALL#4 x 2'-0" DOWELS @ 72" O.C.(5" MIN. EMBED)20" WIDE x 8" DEEPMIN. CONCRETESTRIP FOOTINGSLAB-ON-GRADESLOPE GRADE AWAYFROM FOUNDATION#4 HORIZ. BAR ATTOP OF WALL8" MIN. C.I.P.CONCRETE WALLSEE 2/S2 & 3/S2 FOR TALLWOOD WALL FRAMING12"Ø x 10" LONG ANCHORBOLTS (7" MIN. EMBED)@ 48" O.C. MAX. OR EQUIV.3'-6" MAX.6"MIN.SLOPE GRADE AWAYFROM FOUNDATION20" MIN. WIDE x 8" MIN.THICK CONCRETE FOOTINGCENTERED UNDER WALLSLAB-ON-GRADE#4 HORIZ. BAR@ TOP OF WALL8" C.I.P.CONCRETEWALL#4 x 2'-0" DOWELS (5" MIN.EMBED) CENTERED IN WALL@ 24" O.C. DOWELS MUSTBE WET SET OR DRILLEDAND EPOXY GROUTED12"Ø x 10" LONG ANCHORBOLTS (7" MIN. EMBED)@ 48" O.C. MAX. WALL SECTION 6S2LOOKOUT FOUNDATION WALLTO BE LOCATED IN THE FIELDAS REQUIRED AND ALLOWEDWITH SITE GRADETREATED 2x8 SILL PLATEw/ 112" MAX. OVERHANGSEE 2/S1 FOR TALL WOODWALL FRAMINGFebruary 17, 20211.0522-17-21Single Family Residence16452 Duluth TrailLakeville, MNSigned: I hereby certify that this plan, specification or reportwas prepared by me or under my direct supervisionand that I am a duly Licensed Professional Engineerunder the laws of the State of Minnesota. {\H1.5x;Note: Hip Jacks are higherthan the Sub Girderonce the Laydown Gableis nailed on the faceof the hip, it willplane out.} {\H1.5x;2x4 GableLay Flat} \pxqr;{\H1.2x;2x4 Nailersor Laydown Gable} SubGirder Hip Jack 5"81'1"12'2'2'2'2'2'2'2'2'11"7 1'11"4 2'2'2'2'2'2'2'1'11"42'2'2'2'2'2'2'2'2'2'1'11"42'2'1'11"42'2'2'2'2'2'2'2'2'2'2'2'2' 1'11"4 2'2'2'2'2'2'2'2'2'2'FLOOR CANTFLOOR CANTMONO TRUSSES NOTCHED TO BEAR ON LEDGERHUS26HUS26HUS26HUS26HUS26HUS26HUS26HUS26HUS26HUS26HUS26HUS26HUS26HUS26HUS26ROOF PLAN NOTES: 1. TRUSS IDENTIFICATION LABEL LOCATED ONBOTTOM SIDE OF BOTTOM CHORD 2. ALL DIMENSIONS ARE IN FEET- INCHES-16THS 3. END OF TRUSS WITH "X" TICK MARK ON THE LAYOUTCORRESPONDS WITH LEFT END ON TRUSS DRAWING. 4. DO NOT MODIFY, CUT, OR REPAIR ANY PORTION OF THETRUSSES WITHOUT APPROVAL FROM ABC TRUSS. WARRANTYWILL BE VOIDED WITHOUT OFFICIAL DOCUMENTATION. 5. SEE INDIVIDUAL TRUSS CALC FOR MULTI-PLY GIRDERCONNECTION AND PERMANENT BRACING INFORMATION 6. SEE HANGER INSTALLATION GUIDE OR CATALOG FORMORE DETAIL ON HANGER ATTACHMENT. 7. TEMPORARY BRACING INFORMATION IS SHOWN ON THEBCSI-B1 SUMMARY SHEET LOCATED IN THE JOB PACKET. 8. THE INTENT OF THIS DOCUMENT IS TO SHOW TRUSSPLACEMENT ONLY. THE CONTRACTOR IS RESPONSIBLEFOR VERIFYING ALL DIMENSIONS AND WALL HEIGHTSWITH THE BLUEPRINT PRIOR TO SETTING THE TRUSSES. 9. BEARINGS DESIGNED FOR A FcPerp VALUE OF 425 FOR ALL BEARINGS.(UNLESS NOTED OTHERWISE BY A FcPerp ### NOTE)"TOP PLATE OF BEARING WALL DESIGN AND MATERIAL BY OTHERS." 10. SET ALL VALLEY TRUSSES AFTER MAIN ROOF HAS BEEN SHEATHED.ADJUSTMENT OF SPACING MAY BE REQUIRED. *** GREEN WALLS DROPPED 0-9-14 FROM *** MAIN FLOOR PLATE HEIGHT *** PINK WALLS DROPPED 1-6-4 FROM **** MAIN FLOOR PLATE HEIGHT HANGER KNEE WALL TO BOTTOM CHORDOF ROOF GIRDER USING HUS28 HANGERS TO SUPPORT ROOF ABOVE (see detail in job packet) FLUSH BEAM(supplied by others) FLUSH BEAM(supplied by others) HGUS28-2 2 PLY 2 PLY B BRBR2BABBBC C C1 C2 C3 C4 C5 C6 C7 PC4 PC7 CB CB CB CCCRCRCR2 CDERE E1 E2E2 E3E3 E5 E6 D1D1 ZC ZE ZE2 (3)D (12)CA (2)PC5(6)A1(4)A(12)EA(2)E4 PAGE NO: 1 OF 1 JOB NO: T211460 Name: BROADMOOR GCustomer: Robert Thomas Homes Address: 16452 DULUTH TRAILSalesman: BAEDesigner: DJW \pxqr;{\H1.2x;2x4 Nailersor Laydown Gable}{\H1.5x;2x4 GableLay Flat}{\H1.5x;Note: Hip Jacks are higherthan the Sub Girderonce the Laydown Gableis nailed on the faceof the hip, it willplane out.} SubGirder Hip Jack HUS26HUS26 HUS26 HUS261'11"42'2'2'2'2'2'2'2'2'2'2'2'2'2' 1'11"4 2'2'2'2'2'2'1'11"42'2'2'2'2'2'2'2'1'11"42'2'2'2'2'2'2'2'2'2'2'2'2'2'2'2'2'2'2'2'2'2' 1'11"42'2'0"12 2'0"122'2'11"4 1'3"8 2'2'1'3"8 2'11"4 2' FLUSH BEAM(supplied by others)1' BOX VAULT1' BOX VAULTROOF PLAN NOTES: 1. TRUSS IDENTIFICATION LABEL LOCATED ONBOTTOM SIDE OF BOTTOM CHORD 2. ALL DIMENSIONS ARE IN FEET- INCHES-16THS 3. END OF TRUSS WITH "X" TICK MARK ON THE LAYOUTCORRESPONDS WITH LEFT END ON TRUSS DRAWING. 4. DO NOT MODIFY, CUT, OR REPAIR ANY PORTION OF THETRUSSES WITHOUT APPROVAL FROM ABC TRUSS. WARRANTYWILL BE VOIDED WITHOUT OFFICIAL DOCUMENTATION. 5. SEE INDIVIDUAL TRUSS CALC FOR MULTI-PLY GIRDERCONNECTION AND PERMANENT BRACING INFORMATION 6. SEE HANGER INSTALLATION GUIDE OR CATALOG FORMORE DETAIL ON HANGER ATTACHMENT. 7. TEMPORARY BRACING INFORMATION IS SHOWN ON THEBCSI-B1 SUMMARY SHEET LOCATED IN THE JOB PACKET. 8. THE INTENT OF THIS DOCUMENT IS TO SHOW TRUSSPLACEMENT ONLY. THE CONTRACTOR IS RESPONSIBLEFOR VERIFYING ALL DIMENSIONS AND WALL HEIGHTSWITH THE BLUEPRINT PRIOR TO SETTING THE TRUSSES. 9. BEARINGS DESIGNED FOR A FcPerp VALUE OF 425 FOR ALL BEARINGS.(UNLESS NOTED OTHERWISE BY A FcPerp ### NOTE)"TOP PLATE OF BEARING WALL DESIGN AND MATERIAL BY OTHERS." 10. SET ALL VALLEY TRUSSES AFTER MAIN ROOF HAS BEEN SHEATHED.ADJUSTMENT OF SPACING MAY BE REQUIRED. BEARING WALL BEARING WALL FB FB FB FB FB FB FB FR FRFR F F1 F2 F3 F4 G G1 G2 G3 G4 G5 G6 G7 G8 G9 H1 H J J1 J2 J3 J4 J5 J6 J7 J8 ZF ZG ZG2 ZK ZJ ZJ2 ZJ3 ZJ4 ZJ5 GA GB GD GE GR FC FR K K1 KR JRJRJR JE JE JC JB JA JB JB (7)GC(3)FA(5)FA(5)JD(3)JA(3)KA PAGE NO: 1 OF 1 JOB NO: T211460 Name: BROADMOOR GCustomer: Robert Thomas Homes Address: 16452 DULUTH TRAILSalesman: BAEDesigner: DJW © 16452 Duluth Trail Lakeville 55044 © 16452 Duluth Trail Lakeville 55044 © 16452 Duluth Trail Lakeville 55044 © 16452 Duluth Trail Lakeville 55044 © 16452 Duluth Trail Lakeville 55044 © 16452 Duluth Trail Lakeville 55044 © 16452 Duluth Trail Lakeville 55044 © 16452 Duluth Trail Lakeville 55044 © 16452 Duluth Trail Lakeville 55044 © 16452 Duluth Trail Lakeville 55044 © 16452 Duluth Trail Lakeville 55044 © 16452 Duluth Trail Lakeville 55044 © 16452 Duluth Trail Lakeville 55044 © 16452 Duluth Trail Lakeville 55044 © 16452 Duluth Trail Lakeville 55044 © 16452 Duluth Trail Lakeville 55044 Burnsville Heating & Air Conditioning, Inc. 3451 W. Burnsville Pkwy, Suite 120, Burnsville, MN 55337 Phone 952‐894‐0005 – Fax 952‐894‐0925 – Web www.burnsvilleheating.com _____________________________________________________________________________________ Ventilation, Makeup and Combustion Air Calculations Submittal Form for New Dwellings Site address 16452 Duluth Trail Date 2/11/21 Contractor Burnsville Heating & Air Conditioning, Inc Completed By Alan Dobson VENTILATION REQUIREMENTS TABLE R403.5.2 NUMBER OF BEDROOMS 1 2345 6 2 Conditioned space1 (in sq. ft.) Total/ Continuous Total/ Continuous Total/ Continuous Total/ Continuous Total/ Continuous Total/ Continuous 1000‐1500 60/40 75/40 90/45 105/53 120/60 135/68 1501‐2000 70/40 85/43 100/50 115/58 130/65 145/73 2001‐2500 80/40 95/48 110/55 125/63 140/70 155/78 2501‐3000 90/40 105/53 120/60 135/68 150/75 165/83 3001‐3500 100/50 115/58 130/65 145/73 160/80 175/88 3501‐4000 110/55 125/63 140/70 155/78 170/85 185/93 4001‐4500 120/60 135/68 150/75 165/83 180/90 195/98 4501‐5000 130/65 145/73 160/80 175/88 190/95 205/103 5001‐5500 140/70 155/78 170/85 185/93 200/100 215/108 5501‐6000 150/75 165/83 180/90 195/98 210/105 225/113 1. Conditioned space includes the basement and conditioned crawl spaces. 2. If conditioned space exceeds 6000sp. Ft. or there are more than 6 bedrooms, use Equation R403.5.2 R403.5.2 Total Ventilation rate. The mechanical ventilation system shall provide sufficient outdoor air to equal the total ventilation rate average for each 1‐ hour period in accordance with Table R403.5.2, or Equation 403.5.2, based on the number of bedrooms and square footage of conditioned space, including the basement and conditioned crawl spaces. For the purposes of Table R403.5.2 and Section R403.5.3, the following applies” a. Equation R403.5.2 Total ventilation rate: Total ventilation rate (cfm) = (0.02 x square feet of conditioned space) + (15 x (number of bedrooms+1)) b. Equation R403.5.2.1 Continuous ventilation rate: Continuous ventilation rate (cfm) = Total ventilation rate/2 Amount Total _________213_________ Amount Continuous _______107_________ TABLE 304.1 COMBUSTION AIR REQUIREMENTS FOR GAS‐FIRED APPLIANCES WHEN THE COMBINED INPUT IS UP TO AND INCLUDING 400,000 Btu/hr TOTAL INPUT OF APPLIANCES1, THOUSANDS OF Btu/hr (kW) REQUIRED FREE AREA OF AIR‐ SUPPLY OPENING OR DUCT, SQUARE INCHES (sq mm) ACCEPTABLE APPROXIMATE ROUND DUCT EQUIVALENT DIAMETER2, INCH (mm) 25 (8) 50 (15) 75 (23) 100 (30) 125 (37) 150 (45) 175 (53) 200 (60) 225 (68) 250 (75) 275 (83) 300 (90) 325 (98) 350 (105) 375 (113) 400 (120) 7 (4,500) 7 (4,500) 11 (7,000) 14 (9,000) 18 (12,000) 22 (14,000) 25 (16,000) 29 (19,000) 32 (21,000) 36 (23,000) 40 (26,000) 43 (28,000) 47 (30,000) 50 (32,000) 54 (35,000) 58 (37,000) 3 (75) 3 (75) 4 (100) 4 (100) 5 (125) 5 (125) 6 (150) 6 (150) 6 (150) 7 (175) 7 (175) 7 (175) 8 (200) 8 (200) 8 (200) 9 (225) 1. For total inputs falling between listed capacities, use next largest listed input. 2. If flexible duct is used, increase the duct diameter by one inch. * *Flexible duct shall be stretched with minimal sags. BTU Amount for Non‐direct vent appliances ____________________ IFGC Appendix E, Worksheet E‐1 Residential Combustion Air Calculation Method (for Furnace, Boiler, and/or Water Heater in the Same Space) Step 1: Complete vented combustion appliance information. Furnace/Boiler: ___Draft Hood ___Fan Assisted ___Direct Vent Input (Not fan assisted) & Power Vent ______Btu/hr Water Heater: ___Draft Hood ___Fan Assisted ___Direct Vent Input: (Not fan assisted) &Power Vent ______Btu/hr Step 2: Calculate the volume of the Combustion Appliance Space (CAS) containing combustion appliances. The CAS includes all spaces connected to one another by code compliant openings. CAS volume: _________________ft3 Step 3: Determine Air Changes per Hours (ACH)1 Default ACH values have been incorporated into Table E‐1 for use with Method 4b (KAIR Method). If the year of construction or ACH is not known, use method 4a (Standard Method). Step 4: Determine Required Volume for Combustion Air. 4a. Standard Method Total Btu/hr input of all combustion appliances Input:_____________ Btu/hr (DO NOT COUNT DIRECT VENT APPLIANCES) Use Standard Method column in Table E‐1 to find Total Required Volume (TRV) TRV:_____________ ft3 If CAS Volume (from Step 2) is greater than TRV then no outdoor openings are needed. If CAS Volume (from Step 2) is less than TRV then go to STEP 5. 4b. Known Air Infiltration Rate (KAIR) Method Total Btu/hr input of all fan‐assisted and power vent appliances Input:_____________ Btu/hr (DO NOT COUNT DIRECT VENT APPLIANCES) Use Fan‐Assisted Appliances column in Table E‐1 to find Required Volume Fan Assisted (RVFA) RFVA:_____________ ft3 Total Btu/hr input of all non‐fan‐assisted appliances Input:_____________ Btu/hr Use Non‐Fan‐Assisted Appliances column in Table E‐1 to find Required Volume Non‐Fan‐Assisted (RVNFA) RVNFA:____________ ft3 Total Required Volume (TRV) = RVFA + RVNFA RV=_______________+______________=_______________ft3 If CAS Volume (from Step 2) is greater than TRV then no outdoor openings are needed. If CAS Volume (from Step 2) is less than TRV then go to STEP 5. Step 5: Calculate the ratio of available interior volume to the total required volume. Ratio = CAS Volume (from Step 2) divided by TRV (from Step 4a or Step 4b) Ratio = / = = Step 6: Calculate Reduction Factor (RF). RF ‐ 1 minus Ratio RF = 1 ‐ = m Step 7: Calculate single outdoor opening as if all combustion air is from outside. Total Btu/hr input of all Combustion Appliances in the same CAS (EXCEPT DIRECT VENT) Input: _______________Btu/hr Combustion Air Opening Area (CAOA): Total Btu/hr divided by 3000 Btu/hr per in2 CAOA = /3000 Btu/hr per in2= in2 Step 8: Calculate Minimum CAOA. Minimum CAOA = CAOA multiplied by RF Minimum CAOA = x = in2 Step 9: Calculate Combustion Air Opening Diameter (CAOD) CAOD = 1.13 multiplied by the square root of Minimum CAOA CAOD = 1.13 √ Minimum CAOA =__________ in. 1 If desired, ACH can be determined using ASHRAE calculation or blower door test. Follow procedures in Section G304. IFGC Appendix E, Table E‐1 Residential Combustion air (Required Interior Volume Based on Input Rating of Appliance) Input Rating (Btu/hr) Standard Method (ft3) Known Air Infiltration Rate (KAIR) Method (ft3) Fan Assisted Non‐Fan‐Assisted 19941 to present Pre‐1994 1994 to present Pre‐1994 5,000 250 375 188 525 263 10,000 500 750 375 1,050 525 15,000 750 1,125 563 1,575 788 20,000 1,000 1,500 750 2,100 1,050 25,000 1,250 1,875 938 2,625 1,313 30,000 1,500 2,250 1,125 3,150 1,575 35,000 1,750 2,625 1,313 3,675 1,838 40,000 2,000 3,000 1,500 4,200 2,100 45,000 2,250 3,375 1,688 4,725 2,363 50,000 2,500 3,750 1,675 5,250 2,625 55,000 2,750 4,125 2,063 5,775 2,888 60,000 3,000 4,500 2,250 6,300 3,150 65,000 3,250 4,875 2,438 6,825 3,413 70,000 3,500 5,250 2,625 7,350 3,675 75,000 3,750 5,625 2,813 7,875 3,938 80,000 4,000 6,000 3,000 8,400 4,200 85,000 4,250 6,375 3,188 8,925 4,463 90,000 4,500 6,750 3,375 9,450 4,725 95,000 4,750 7,125 3,563 9,975 4,988 100,000 5,000 7,500 3,750 10,500 5,250 105,000 5,250 7,875 3,938 11,025 5,513 110,000 5,500 8,250 4,125 11,550 5,775 115,000 5,750 8,625 4,313 12,075 6,038 120,000 6,000 9,000 4,500 12,600 6,300 125,000 6,250 9,375 4,688 13,125 6,563 130,000 6,500 9,750 4,875 13,650 6,825 135,000 6,750 10,125 5,063 14,175 7,088 140,000 7,000 10,500 5,250 14,700 7,350 145,000 7,250 10,875 5,438 15,225 7,613 150,000 7,500 11,250 5,625 15,750 7,875 155,000 7,750 11,625 5,813 16,275 8,138 160,000 8,000 12,000 6,000 16,800 8,400 165,000 8,250 12,375 6,188 17,325 8,663 170,000 8,500 12,750 6,375 17,850 8,925 175,000 8,750 13,125 6,563 18,375 9,188 180,000 9,000 13,500 6,750 18,900 9,450 185,000 9,250 13,875 6,938 19,425 9,713 190,000 9,500 14,250 7,125 19,950 9,975 195,000 9,750 14,625 7,313 20,475 10,238 200,000 10,000 15,000 7,500 21,000 10,500 205,000 10,250 15,375 7,688 22,525 10,783 210,000 10,500 15,750 7,875 22,050 11,025 215,000 10,750 16,125 8,063 22,575 11,288 220,000 11,000 16,500 8,250 23,100 11,550 225,000 11,250 16,875 8,438 23,625 11,813 230,000 11,500 17,250 8,625 24,150 12,075 1 The 1994 date refers to dwellings constructed under the 1994 Minnesota Energy Code. The default KAIR used in this section of the table is 0.20 ACH. 2 This section of the table is to be used for dwellings constructed prior to 1994. The default KAIR used in this section of the table is 0.40 ACH. Table 501.4.1 Procedure to Determine Makeup Air Quantity for Exhaust Appliances in Dwelling Units ONE OR MULTIPLE POWER VENT OR DIRECT VENT APPLIANCES OR NO COMBUSTION APPLIANCESA ONE OR MULTIPLE FAN‐ASSISTED APPLIANCES AND POWER VENT OR DIRECT VENT APPLIANCESB ONE ATMOSPHERICALLY VENTED GAS OR OIL APPLIANCE OR ONE SOLID FUEL APPLIANCEC MULTIPLE APPLIANCES THAT ARE ATMOSPHERICALLY VENTED GAS OR OIL APPLIANCES OR SOLID FUEL APPLIANCESD 1. Use Appropriate Column to Estimate House Infiltration a) pressure factor (cfm/sf) 0.15 0.09 0.06 0.03 b) conditioned floor area (sf) 6,136 (including unfinished basements) Estimated House Infiltration (cfm): [1ax 1b] 920.4 2. Exhaust Capacity a) Clothes dryer 135 135 135 135 b) 80% of largest exhaust rating (cfm) 240 (not applicable if recirculating system or if powered makeup air is electrically interlocked and matched to exhaust c) 80% of next largest exhaust rating (cfm): 64 (not applicable if recirculating system or if powered makeup air is electrically interlocked and matched to exhaust Total Exhaust Capacity (cfm): [2a+2b+2c] 439 3. Makeup Air Requirement 547) Total Exhaust Capacity (from above) 439 b) Estimated House Infiltration (from above) 920.4 Makeup Air Quality (cfm): [3a‐3b] ‐481.4 (if value is negative, no makeup air is needed 4. For Makeup Air opening Sizing, refer to Table 501.4.2 A. Use this column if there are other than fan‐assisted or atmospherically venter gas or oil appliances or if there are no combustion appliances. B. Use this column if there is one fan‐assisted appliance per venting system. Other atmospherically vented appliances may also be included. C. Use this column if there is one atmospherically vented (other than fan‐assisted) gas or oil appliance per venting system or one solid fuel appliance. D. Use this column if there are multiple atmospherically vented gas or oil appliances using a common vent or if there are atmospherically vented gas or oil Table 501.4.2 Makeup Air Opening Sizing Table for New and Existing Dwelling Units TYPE OF OPENING OR SYSTEM ONE OR MULTIPLE POWER VENT OR DIRECT VENT APPLIANCES OR NO COMBUSTION APPLIANCESA ONE OR MULTIPLE FAN‐ASSISTED APPLIANCES AND POWER VENT OR DIRECT VENT APPLIANCESB ONE ATMOSPHERICALLY VENTED GAS OR OIL APPLIANES OR ONE SOLID FUEL APPLIANCEC MULTIPLE APPLIANCES THAT ARE ATMOSPHERICALLY VENTED GAS OR OIL APPLIANCES OR SOLID FUEL APPLIANCESD PASSIVE MAKEUP AIR OPENING DUCT DIAMETERE,F,G (cfm) (cfm) (cfm) (cfm) (inches) Passive opening 1 – 36 1 –22 1 –15 1 –9 3 Passive opening 37 – 66 23 –41 16 –28 10 –17 4 Passive opening 67 – 109 42 –66 29 –46 18 –28 5 Passive opening 110 ‐ 163 67 –100 47 –69 29 –42 6 Passive opening 164 – 232 101 –143 70 –99 43 –61 7 Passive opening 233 – 317 144 –195 100 –135 62 –83 8 Passive opening w/motorized damper 318 – 419 196 – 258 136 – 179 84 – 110 9 Passive opening w/motorized damper 420 – 539 259 – 332 180 – 230 111 – 142 10 Passive opening w/motorized damper 540 – 679 333 – 419 231 – 290 143 – 179 11 Powered makeup airH >679 >419 >290 >179 NA A. Use this column if there are other than fan‐assisted or atmospherically vented gas or oil appliances or if there are no combustion appliances. B. Use this column if there is one fan‐assisted appliance per venting system. Other than atmospherically vented appliances may also be included. C. Use this column if there is on atmospherically vented (other than fan‐assisted) gas or oil appliance per venting system or one solid fuel appliance. D. Use this column if there is multiple atmospherically vented gas or oil appliances using a common vent or I there are atmospherically vented gas or oil appliances and solid fuel appliances. E. An equivalent length of 100 feet of round smooth metal duct is assumed. Subtract 40 feet for the exterior hood and ten feet for each 90‐degree elbow to determine the remaining length of straight duct allowable. F. If flexible duct is used, increase the duct diameter b one inch. Flexible duct shall be stretched with minimal sags. G. Barometric dampers are prohibited in passive makeup air openings when any atmospherically vented appliance is installed. H. Powered makeup air shall be electrically interlocked with the largest exhaust system. Date Certificate Posted x Passive (No Fan) Active (With fan and monometer or other system monitoring device) Location (or future location) of Fan: Other Please Describe Here X R-10 X R-21 X R-21 X R-21 X R-49 X R-30 X R-30 X R-30 X X Not applicable, all ducts located in conditioned space X Not required per mech. code Passive Powered Interlocked with exhaust device. Describe: Input in BTUS:100,000 Capacity in Gallons: Other, describe: AFUE or HSPF%92% Cfm's " round duct OR " metal duct Not required per mech. code X Passive Low: Other, describe: XLow: Location of fan(s), describe: Cfm's 6 " round duct OR " metal duct Bay Windows or cantilevered areas Floors over unconditioned area Per R401.3 Certificate. A building certificate shall be posted on or in the electrical distribution panel.2/11/2021 New Construction Energy Code Compliance Certificate Name of Residential Contractor Robert Thomas Homes MN License Number BC644819 City Mailing Address of the Dwelling or Dwelling Unit Lakeville16452 Duluth Trail Mech Room Heat Recover Ventilator (HRV) Capacity in cfms: Energy Recover Ventilator (ERV) Capacity in cfms: Combustion Air Select a Type Location of duct or system: 33,88983,395 Heating Gain Cooling Load 107 213 Select Type Describe any additional or combined heating or cooling systems if installed: (e.g. two furnaces or air source heat pump with gas back-up furnace): 26,594 Residential Load Calculation Heating Loss 0.34 Describe other insulated areas RADON CONTROL SYSTEM Rim Joist (2nd Floor+) 0.28 Building envelope air tightness: 6 MIL POLY - 4" AGG INTERIOR INTERIOR Below Entire Slab Rigid, Extruded PolystyreneRigid, Isocynurate Perimeter of Slab on Grade Ceiling, flat ATTIC EXTERIOR SEALANT Rim Joist (1st Floor) Windows & Doors Ceiling, vaulted 3 Appliances Cooling SystemTotal R-Value of all Types of InsulationType: Check All That Apply Mineral FiberboardTHERMAL ENVELOPE Insulation Location Foam, Closed CellFoam Open Cell Wall Non or Not ApplicableFiberglass, BlownFiberglass, Batts Foundation Wall R-value Average U-Factor (excludes skylights and one door ) U: Duct system air tightness: Fuel Type Solar Heat Gain Coefficient (SHGC): PROG50 DX13SN0361 Location of duct or system: Heating or Cooling Ducts Outside Conditioned Spaces R-410A Make-up Air Select a Type Rheem Domestic Water Heater Gas MECHANICAL SYSTEMS Rating or Size Efficiency 13SEER /EER Model Heating System Gas Daikin DM92SE1005CN Manufacturer Daikin 50 Output in Tons: Total ventilation (intermittent + continuous) rate in cfms: Balanced Ventilation capacity in cfms: High: High: MECHANICAL VENTILATION SYSTEM Capacity continuous ventilation rate in cfms: Builders Associaton of Minnesota version 101014 NEW RESIDENTIAL CONSTRUCTION SWPPP VERIFICATION This form must be completed and submitted with all new residential permit applications. New residential building permits WILL NOT be issued without this completed form. Project Site Address: _____________________________________________________________________ Company Name: _________________________________________________________________________ Primary Contact: _________________________________________________________________________ Phone # (24 hr Contact): ______________________ Email: ______________________________________ Description of Land Disturbing Activity: _____________________________________________________ NPDES Construction Stormwater Permit # C000 ___ ___ ___ ___ ___ or # SUB00 ___ ___ ___ ___ ___ If you are not covered under a NPDES Construction Stormwater Permit administered by the MPCA, an erosion and sediment control plan MUST be submitted with the residential building permit application. “The permittee(s) shall ensure that the individuals are trained by local, state, federal agencies, professional organizations or other entities in erosion prevention, sediment control, permanent Stormwater management and the Minnesota NPDES/SDS Construction Stormwater Permit.” (NPDES Construction Stormwater Permit, MPCA) “The permittee(s) must ensure that a trained person (as identified in Part III.A.3.a) will routinely inspect the entire construction site at least once every seven (7) days during active construction and within 24 hours after a rainfall event greater than 0.5 inches in 24 hours.” (NPDES Construction Stormwater Permit, MPCA) Contact information of person CERTIFIED to provide weekly onsite erosion and sediment control inspections and corrective actions: Name of Person: ________________________________Company: _______________________________ Phone # (24 hr Contact): ______________________ Email: ______________________________________ Entity that Provided Training: ________________________ Certification Expiration Date: ____________ NOTE: Prior to any land-disturbing activity, all erosion and sediment controls must be installed on the project site and on individual lots. No land disturbing activity may begin until a residential building permit has been issued. I understand, the above information to be true and I will have read, understood, and accepted all terms and conditions of the National Pollutant Discharge Elimination System (NPDES) Permit (MN R 100001). The City of Lakeville may issue a STOP WORK ORDER; withhold building inspections; or, draw on securities/escrows to bring the site into compliance with the NPDES Construction Stormwater Permit (MN R 100001) or erosion and sediment control plan. Signature: ________________________________________________ Date:_________________________ Contact the City of Lakeville with questions at erosion@lakevillemn.gov or 952-985-4500 16452 Duluth Trail Robert Thomas Homes Sean McNamara 952-412-4356 sean.mcnamara@robertthomashomes.com Excavation/construction of single family home 15765 Rob St. Sauver Robert Thomas Homes 952-292-2419 rob.stsauver@traditiondevelopment.com UofMN 5/31/2022 R 100001)))))))))))))))))))))))))))))))))ooooooooooooooooooooooooooooooooooooooor rrrrrrr rrrrrrrrrrrrrrrrrrrrrrrrr ererereeeereeeeerrrrrrreereeeeeeerereeeerererrererrrreeerereereereeeeerrrrrrreeeeeeeereeerrrosooosoooooososososoooooosooosososososososooosssososososososososossssssooososossssssoosooooooooosoosssssssosooooossssssssosssssssssssssssssion anddd sediment control plan. e:______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ D 2/11/21 03/05/21 X KP