Loading...
HomeMy WebLinkAboutLA221720 - Approved-20586 Hazelwood Tr Solar PlanI hereby certify that this plan, specification, or report was prepared by me or under my direct supervision and that I am a duly Licensed Professional Engineer under the laws of the state of Minnesota. Signature: Printed Name: Chandramouli Vaidyanathan Date: Feb 21, 2024 License Number: 52460 Concept Approval ONLYSubject to Field Inspection Inspector Date 2015 MN Bldg Code 02/22/2024jnuetzman � � � � � � � � � � � � � � � � � � I hereby certify that this plan, specification, or report was prepared by me or under my direct supervision and that I am a duly Licensed Professional Engineer under the laws of the state of Minnesota. Signature: Printed Name: Chandramouli Vaidyanathan Date: Feb 21, 2024 License Number: 52460 I hereby certify that this plan, specification, or report was prepared by me or under my direct supervision and that I am a duly Licensed Professional Engineer under the laws of the state of Minnesota. Signature: Printed Name: Chandramouli Vaidyanathan Date: Feb 21, 2024 License Number: 52460 I hereby certify that this plan, specification, or report was prepared by me or under my direct supervision and that I am a duly Licensed Professional Engineer under the laws of the state of Minnesota.Signature: Printed Name: Chandramouli VaidyanathanDate: Feb 21, 2024 License Number: 52460 I hereby certify that this plan, specification, or report was prepared by me or under my direct supervision and that I am a duly Licensed Professional Engineer under the laws of the state of Minnesota. Signature: Printed Name: Chandramouli Vaidyanathan Date: Feb 21, 2024 License Number: 52460 CertainTeed Solar CT SERIES 144 HALF-CELL SOLAR MODULES Features and Benefits High Quality / High Power Up to 390W black backsheet / 400W white backsheet UL listed (UL 1703) Positive power output tolerance Half-Cell Monocrystalline Type CT390HC11-04 CT390HC00-04 CT395HC11-04 CT395HC00-04 CT400HC11-04 CT400HC00-04 Limited Warranty* 25-year linear power output warranty *See CertainTeed’s limited warranty for details See reverse for product specifications Power Output Warranty CertainTeed CEILINGS • DECKING • FENCE • GYPSUM • INSULATION • RAILING • ROOFING • SIDING • TRIM 20 Moores Road Malvern, PA 19355 Professional: 800-233-8990 Consumer: 800-782-8777 certainteed.com © 2/20 CertainTeed, Printed in the USA, Code No. PV-01-019 Dimensions Electrical Characteristics Operating Conditions Mechanical Characteristics 390W 395W 400W Nominal Output (Pmpp)W 390 395 400 Voltage at Pmax (Vmpp)V 40.4 40.6 40.8 Current at Pmax (Impp)A 9.7 9.7 9.8 Open Circuit Voltage (Voc)V 48.2 48.4 48.6 Short Circuit Current (lsc)A 10.5 10.6 10.6 Output Tolerance W -0 / + 5 No. of Cells & Connections 144 half-cells in series / 3 bypass diodes Maximum Series Fuse Rating 20A Cell Type 6” half-cut monocrystalline Module Efficiency %19.4 19.6 19.9 Temperature Coefficient of Pmpp %/C -0.42 Temperature Coefficient of Voc %/C -0.31 Temperature Coefficient of Isc %/C 0.05 Laminate Glass: 3.2 high transmission, tempered, anti-reflective Encapsulant: EVA Backsheet: Weatherproof film (Black or White) Frame Anodized aluminum (Black or Silver) Junction Box IP67/IP68 Output Cables 4 mm2 (12AWG) PV Wire, Length 1.2m (47.2”) Connectors Polarized MC4 compatible Weight 23.0kg (50.7 lbs) Nominal Operating Cell Temp.45+/-2° C Operating Temperature -40 to 85° C Maximum System Voltage 1,000V Fire Performance Class C / Type 1 Maximum Wind Load 50 lbs/ft2 (2400 Pa) Maximum Snow Load 112 lbs/ft2 (5400 Pa) Junction Box x 3 Grounding Mark x2 Mounting Holes x4Ø9mm0.35" GroundingHoles x2Ø4mm0.16" Distance between mounting holes*Grounding holes 2000 mm78.74" 1176 mm*46.29" (-)(+) 1200mm47.24"≈≈ 1676mm*65.98" 40mm1.57" 992mm39.06"942mm*37.09" DATA SHEET IQ8 and IQ8+ Microinverters Our newest IQ8 Microinverters are the industry’s first microgrid-forming, software-defined microinverters with split-phase power conversion capability to convert DC power to AC power efficiently. The brain of the semiconductor-based microinverter is our proprietary application-specific integrated circuit (ASIC), which enables the microinverter to operate in grid-tied or off-grid modes. This chip is built using advanced 55-nm technology with high-speed digital logic and has superfast response times to changing loads and grid events, alleviating constraints on battery sizing for home energy systems. Easy to install • Lightweight and compact with plug- and-play connectors • Power line communication (PLC) between components • Faster installation with simple two-wire cabling High productivity and reliability • Produce power even when the grid is down* • More than one million cumulative hours of testing • Class II double-insulated enclosure • Optimized for the latest high-powered PV modules Microgrid-forming • Compliant with the latest advanced grid support** • Remote automatic updates for the latest grid requirements • Configurable to support a wide range of grid profiles • Meet CA Rule 21 (UL 1741-SA) and IEEE® 1547:2018 (UL 1741-SB 3rd Ed.) NOTE: • IQ8 Microinverters cannot be mixed with previous generations of Enphase microinverters (IQ7 Series, IQ6 Series, and so on) in the same system. • IQ Gateway is required to change the default grid profile at the time of installation to meet local Authority Having Jurisdiction (AHJ) requirements. © 2023 Enphase Energy. All rights reserved. Enphase, the e and CC logos, IQ, and certain other marks listed at https://enphase.com/trademark-usage-guidelines are trademarks of Enphase Energy, Inc. in the US and other countries. Data subject to change. *Meets UL 1741 only when installed with IQ System Controller 2. **IQ8 and IQ8+ support split-phase, 240 V installations only. Part of the Enphase Energy System, IQ8 Series Microinverters integrate with the IQ Battery, IQ Gateway, and the Enphase App monitoring and analysis software. IQ8 Series Microinverters redefine reliability standards with more than one million cumulative hours of power-on testing, enabling an industry-leading limited warranty of up to 25 years. Connect PV modules quickly and easily to IQ8 Series Microinverters using the included Q-DCC-2 adapter cable with plug-and-play MC4 connectors. IQ8 Series Microinverters are UL Listed as PV rapid shutdown equipment and conform with various regulations, when installed according to the manufacturer’s instructions. IQ8SP-12A-DSH-00207-2.0-EN-US-2023-10-13 (1) No enforced DC/AC ratio. (2) Nominal voltage range can be extended beyond nominal if required by the utility. (3) Limits may vary. Refer to local requirements to define the number of microinverters per branch in your area. IQ8 and IQ8+ Microinverters INPUT DATA (DC)UNITS IQ8-60-2-US IQ8PLUS-72-2-US Commonly used module pairings1 W 235–350 235–440 Module compatibility —To meet compatibility, PV modules must be within maximum input DC voltage and maximum module Isc listed below. Module compatibility can be checked at https://enphase.com/installers/microinverters/calculator MPPT voltage range V 27–37 27–45 Operating range V 16–48 16–58 Minimum/Maximum start voltage V 22/48 22/58 Maximum input DC voltage V 50 60 Maximum continuous input DC current A 10 12 Maximum input DC short-circuit current A 25 Maximum module Isc A 20 Overvoltage class DC port —II DC port backfeed current mA 0 PV array configuration —1 × 1 ungrounded array; no additional DC side protection required; AC side protection requires maximum 20 A per branch circuit. OUTPUT DATA (AC)UNITS IQ8-60-2-US IQ8PLUS-72-2-US Peak output power VA 245 300 Maximum continuous output power VA 240 290 Nominal grid voltage (L-L) V 240, split-phase (L-L), 180° Minimum and Maximum grid voltage2 V 211-264 Maximum continuous output current A 1.0 1.21 Nominal frequency Hz 60 Extended frequency range Hz 47–68 AC short-circuit fault current over three cycles Arms 2 Maximum units per 20 A (L-L) branch circuit3 —16 13 Total harmonic distortion %<5 Overvoltage class AC port —III AC port backfeed current mA 30 Power factor setting —1.0 Grid-tied power factor (adjustable)—0.85 leading … 0.85 lagging Peak efficiency %97.7 CEC weighted efficiency %97 Nighttime power consumption mW 23 25 MECHANICAL DATA Ambient temperature range -40°C to 60°C (-40°F to 140°F) Relative humidity range 4% to 100% (condensing) DC connector type MC4 Dimensions (H × W × D)212 mm (8.3 in) × 175 mm (6.9 in) × 30.2 mm (1.2 in) Weight 1.08 kg (2.38 lbs) Cooling Natural convection–no fans Approved for wet locations Yes Pollution degree PD3 Enclosure Class II double-insulated, corrosion-resistant polymeric enclosure Environmental category/UV exposure rating NEMA Type 6/Outdoor IQ8SP-12A-DSH-00207-2.0-EN-US-2023-10-13 IQ8SP-12A-DSH-00207-2.0-EN-US-2023-10-13 IQ8 and IQ8+ Microinverters COMPLIANCE Certifications CA Rule 21 (UL 1741-SA), UL 62109-1, IEEE® 1547:2018 (UL 1741-SB 3rd Ed.), FCC Part 15 Class B, ICES-0003 Class B, CAN/CSA-C22.2 NO. 107.1-01 This product is UL Listed as PV rapid shutdown equipment and conforms with NEC 2014, NEC 2017, NEC 2020, and NEC 2023 section 690.12 and C22.1-2018 Rule 64-218 rapid shutdown of PV Systems, for AC and DC conductors, when installed according to the manufacturer’s instructions. © 2023 Enphase Energy. All rights reserved. Enphase, the e and CC logos, IQ, and certain other marks listed at https://enphase.com/trademark-usage-guidelines are trademarks of Enphase Energy, Inc. in the US and other countries. Data subject to change. IQ8SP-12A-DSH-00207-2.0-EN-US-2023-10-13 Revision history REVISION DATE DESCRIPTION DSH-00207-2.0 October 2023 Included NEC 2023 specification in the Compliance section DSH-00207-1.0 September 2023 Updated module compatibility specification IQ8 and IQ8+ Microinverters Zero Roof holes Solar Racking solution Customer quotes, “Best service in the industry. Reliable, effective and will get the job done to exceed expectation.” Bruce “Extremely happy with the quality.” Mike Z-Rack •Simple & Affordable. •UL Listed. •Integrated bonding. •Recyclable. Z Rack frame. Advantage SolarPodTM No holes on the sloped roof. Hence guarantee leak free. No holes ensures the roof rafters are never compromised. No holes reduces labor costs and installation costs. Z Rack can be placed on all roof materials—shingle, metal, tile and wood. 100% recyclable materials and decades of proven durability makes the Z Rack solu- tions most versatile. Weight of system including solar modules is 4.5 psf. Keeping to the mission of SolarPodTM to be the most affordable, simple and modular, the roof solution provides the most flexible & cost effective solution. Certifications •ANSI / UL 2703 / UL 1703 •ASCE 7-10 & ASCE 7-16 •UL System Fire Class Rating A. •Mechanical load : Up to 188 lbs/sq.ft •LADPW Approved & Seismic Approval Quality The Z Rack is approved to wind speeds of 170 mph. Its construction meets IBC and ICC standards. Data Sheet Jan 2023 SolarPod 2915 133rd St W Shakopee, MN 55379 Tel: 763-404-7580 mysolarpod.com zsolarsolutions.com sales@mysolarpod.com Complete USA Made Z Rack frame and solar panels. Photovoltaic Mounting System E474752 Contact Us SolarPod 2915 133rd St W, Shakopee, MN 55379 (763)404-7580 sales@mysolarpod.com Visit us at www.mysolarpod.com Sturdy construction We are engineers. We build strong, environmentally friendly and affordable systems that have an integrated system approach. SolarPod 2915 133rd St W Shakopee, MN 55379 Tel: 763-404-7580 Sturdy steel brackets specialized for roof mount with ease of installation. Specialized mid clamps integrate module bonding. Proven technology. Reliable service. It’s called a story for a reason We are building trust to make our relationship most effective for long term success. What to expect? 1.Standard 25 year warranty 2.Integrated bonding. 3.Full in-house engineering support (CAD Drawings, component list and support) 4.PE Stamped drawings for all locations. PE: WI, MN & All 50 states mysolarpod.com zsolarsolutions.com sales@mysolarpod.com Complete USA Made CERTIFICATE OF COMPLIANCE Certificate Number E474752 Report Reference E474752-20150913 Issue Date 2020-SEPTEMBER-22 Bruce Mahrenholz, Director North American Certification Program UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/ Page 1 of 1 Issued to: Mouli Engineering Inc 655 Lexie Ct Eagan MN 55123 This certificate confirms that representative samples of MOUNTING SYSTEMS, MOUNTING DEVICES, CLAMPING DEVICES AND GROUND LUGS FOR USE WITH PHOTOVOLTAIC MODULES AND PANELS Mounting systems for use with photovoltaic modules: Z Rack Z Lite Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate. Standard(s) for Safety: UL 2703, Mounting Systems, Mounting Devices, Clamping/Retention Devices, and Ground Lugs for use with Flat-Plate Photovoltaic Modules and Panels. Additional Information: See the UL Online Certifications Directory at https://iq.ulprospector.com for additional information. Only those products bearing the UL Mark should be considered as being UL Certified and covered under UL’s Follow-Up Services. Look for the UL Certification Mark on the product.